GE 25425 Benutzerhandbuch

Phone does not ring.
•   Make sure the ringer is turned on.
•  Make sure the Do Not Disturb feature is not activated.
•  You may have too many extension phones on your line. Try unplugging some phones.
•  See solutions for “No dial tone.”
Incoming voice too low or none at all.
•  Check  volume setting.
Memory dialing doesn’t work
•  Did you program the memory location keys correctly?
•  Did you follow proper dialing sequence? 
Battery icon is blank or shows only one bar
•  The 4 “AAA” batteries need replacing or are improperly installed or not installed at all.
Intercom does not function correctly
•  Make sure line 1 is connected properly and common to all phones on the system.
•  Make sure all phone ID’s (station numbers) involved have been assigned.
Transfer does not function correctly
•  Make sure receiver phones (stations) have same line connected.
Intercom indicator turns red and blue alternately
•  The station address needs to be re-assigned due to a duplicate station address in the 

system. See “Changing the Phone ID (Station Address)”.

To keep your telephone working and looking good, follow these guidelines:
•  Avoid putting the phone near heating appliances and devices that generate electrical 

noise (for example, motors or fluorescent lamps).

•  DO NOT expose to direct sunlight or moisture.
•  Avoid dropping the handset, as well as other rough treatment to the phone.
•  Clean the phone with a soft cloth. 
•  Never use a strong cleaning agent or abrasive powder because this will damage  

the finish.

•  Retain the original packaging in case you need to ship the phone at a later date.