JVC SR-DVM700U Benutzerhandbuch

It is possible to mark positions (up to 999 points) where you want to 
play back once again later, and start playback from a marked 
position. Marking onto DVD-RAM/R/RW (VR mode only) discs 
when recording is helpful to locate a start point when you play back 
the discs later.

To mark positions:
During playback, press MARK at 
positions you want to mark.

●

AMARKB appears on the TV 
screen. You can easily locate the 
marked positions using 

S or T

when you play back the disc.

To delete the marked positions:
While paused, press 

S or T to 

locate a marked position you want to 
delete, then press MARK.

●

Crossed 

AMARKB appears on the 

TV screen, and the marked position 
is deleted.

●

For DVD-R/RW (Video mode) discs, marks are assigned 
automatically every 5 minutes.

●

If MARK is pressed when playing back a disc that does not allow 
marks to be inserted, 

A7B appears on the TV screen.

You can check time information of a disc on the front display panel 
and the TV screen.
8 DVD-RAM/DVD-R/DVD-RW
Each press of DISPLAY on the remote control or the unit changes 
the display as follows:
During recording
Clock time (front display panel only) 

N Current title elapsed time 

N Disc remaining time N (back to the beginning)
During playback
Each title elapsed time 

N Total remaining time N Remaining time* 

N (back to the beginning)

During recording/playback or in stop mode
Press REC MODE.

●

The disc remaining time according to recording modes appears 
on the TV screen.

●

It is possible to check disc remaining time according to recording 
modes also by pressing REMAIN.

●

In FR mode, it is possible to set recording time in detail. While the 
recording mode and the disc remaining time are displayed by 
pressing REMAIN, press selection keys to select 

AFRB, then 

press

D E to select the desired recording time. (A pg. 51)

●

It is not possible to switch the recording mode during playback or 
while recording.

8 Video CD/SVCD/Audio CD
During playback or in stop mode
Current track elapsed time 

N Current track remaining time N Total 

elapsed time 

N Total remaining time N (back to the beginning)

●

When a PBC-compatible Video CD/SVCD disc is loaded, 
deactivate the PBC function. (

A pg. 26)

●

For pre-recorded DVD VIDEO, only the title, chapter and elapsed 
time are displayed when ON SCREEN is pressed.

You can enjoy a variety of scene angles if a DVD VIDEO disc 
contains 

Amulti-angleB parts, where the same scene was shot from 

different angles.
If the disc contains 

Amulti-angleB parts, AyB appears on the TV 

screen at the beginning of the 

Amulti-angleB part.

Press ANGLE during playback. 
The angle selection display 
appears on the TV screen.

Press ANGLE or selection 
keys to select your desired 
angle.

●

Each time you press ANGLE or the selection keys, the angle 
changes.

●

When

A7B appears on the TV screen, the current scene is not 

recorded from multiple angles. In addition, some discs prohibit 
angle selection.

●

To clear the angle selection display, press ENTER. In addition, 
the angle selection display disappears automatically if no 
operation is done for 10 seconds.

T/NEXT

o

I

S/PREVIOUS

FGDE

DVD

TV