RGB Spectrum DGy 201x Benutzerhandbuch

. . . . .

The internal clock is synchronized to the currently 
selected reference signal (NTS or IRIG) periodically. 
Adjust the length of time between updates by defining 
the update period in the entry box provided. The default 
period is 2 hours but the rate may be set from a 
minimum update period of 30 minutes to a maximum 
update period of 24 hours; entries may be made in 
increments of 30 minutes. Having a short update period 
may be required when using multiple DGy 201x 
recorders in a time-synchronized application.

Click the 

 button to remotely power off the 

DGy 201x. The recorder will go through the same 
shutdown procedure as when the front panel power 
switch is used. Follow the on-screen prompts to confirm 
or cancel shutdown. Shutdown will take 10 to 15 
seconds to complete. During shutdown, the power 
indicator on the DGy will remain lit, but the system will 
be inoperable. When shutdown is complete, the WCP 
may be closed.

Do not remove the power cord from the rear of the 
DGy until the shutdown process is complete. Failure 
to wait for the normal shutdown procedure to execute 
may cause loss of data.