Samsung SVR-1670 Benutzerhandbuch

Digital Video Recorder        User Guide

Digital Video Recorder        User Guide

To detach a hard disk drive, follow the instructions below:
1. Unplug the SATA and power cables. Remove the screws that connect the SVR-1670 main unit

and the hard disk drive bracket.

2. Lift up the loose hard disk bracket.

3. Remove fixture screws on the both sides of the hard disk and the bracket. Store the removed

fixture screws safely, so you can use them to connect a hard disk again later.

4. Push the hard disk drive out from the bracket.

Figure 3.6.9 Removing Screws that Connect the SVR-1670 and Hard Disk Drive Bracket

A

A

D

B

C

C

B

D

Figure 3.6.10 Lifting Hard Disk Drive Bracket from the SVR-1670

Now, it is time to configure and disable the hard drive from the system.

Figure 3.6.11 Removing Hard Disk Drive

To disable the removed hard disk drive, you must change its availability to " X " on the SVR-
1670’s Disk Manager menu.
1. From the OSD, select the System Settings menu.
2. Select the Disk submenu, and then, on it, select Disk Manager.
3. Select the removed hard disk drive, and then press ESC to exit the menu. Select Remove, and

then press Enter.

4. At the confirmation message, select “Yes” to remove the hard disk drive from the list.

Figure 3.6.9 Disk Manager Menu Showing Disabled Hard Disk Drive