Toshiba D-R17DTKB Benutzerhandbuch

41

EN

• If there is a power failure or the unit is unplugged for 

more than 30 seconds, the clock setting and all 
timer settings will be lost.

• If a disc is not inserted or if a inserted disc is not 

recordable (finalised DVD-RW/-R, finalised DVD+R, 
a fully recorded disc, etc.), 

 flashes and timer 

recording cannot be performed. In some cases, 

 

will appear momentarily around the start point as the 
unit attempts to record. Please insert a recordable 
disc.

• When all timer recordings are complete, the 

  

icon flashes. To play back or eject the recorded disc, 
press [

 ON / STANDBY], and then press 

P] or [OPEN / CLOSE O].

• You cannot make any DVD operation during DVD 

timer recording.

• If the Start and End times are same, the length of 

the recording will be set for 24 hours. If the disc 
becomes full during recording, the unit will turn itself 
off. To continue recording, press 
[

 ON / STANDBY] to cancel the timer-standby 

mode, insert a recordable disc and press 
[

 ON / STANDBY] again.

• When 2 or more programmes are overlapped, 

“Timer program overlapped” appears, and the 
overlapped programme will be displayed in blue. To 
correct the timer programme refer to “Checking, 
Cancelling or Correcting the Timer Programming 
Information” on page 40.

• If the Start time is earlier and the End time is later 

than the current time, the recording will start 
immediately after you press [

 ON / STANDBY].

Priority of overlapped settings
The unit records programmes according to priority if 
the timer programmes overlap.

If the starting time is same:
• The timer programming set first (PROG. 1) has 

priority.

When the starting time and the ending time for 
each programmes are different:
• A programme that has earlier start time has priority.

If the recording time is partially overlapped:
• The timer programming with the earlier start time 

(PROG. 2) has priority. PROG. 1 will start after 
PROG. 2 recording is complete.

If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not 

recorded.

Note for DVD recording
• If the recording time of two programmes are 

overlapped, or the End time of a programme and the 
Start time of another is same, the first 2 minutes (at 
the longest) of the subsequent programme will be 
cut off.

If the End time of the programme currently being 
recorded and the Start time of the subsequent 
programme are same:
• If PROG. 1 is a DVD recorded programme, the 

beginning of PROG. 2 may be cut off.

* If the cut off time exceeds 3 minutes, the error 

number “E40” will appear in the Timer Programming 
list.

PROG. 2 
recording 
will start 
after 
PROG. 1 
recording is 
completed.

The first 2 minutes (at the longest) will be cut off.

The first 2 minutes (at the longest) will be cut off.

The first 2 minutes (at the longest) will be cut off.

The first 2 minutes 

(at the longest) will be cut off.*

E7J70BD_EN.book  Page 41  Monday, May 7, 2007  3:31 PM