Pentair P4 Benutzerhandbuch

Page 18

1. 

Remove the Handheld Remote from the 
packaging.

2. 

On the back of the Handheld Remote, 
loosen and remove the two (2) screws that 
secure the cover for the battery chamber 
(see Figure 19).

3. 

Install two (2) AA batteries. Ensure that the 
polarity is correct. 

4. 

Re-install the cover for the battery chamber 
and secure with the two (2) screws removed 
in Step 2.

If your AquaLink RS PDA system is turning items 
on or off at undesignated times, another AquaLink 
RS PDA system may be in close proximity using 
the same or similar frequency channel. To prevent 
unwanted operation the channel for your AquaLink 
RS PDA system can be changed. The Power Center 
Trans ceiv er and the PDA Transceiver J-box must 
be set to the same RF channel. 

1. 

At the Transceiver J-box, remove the cover 
to expose the PCB (see Figure 20).

2. 

On the PDA Handheld Remote, press 
and hold both the UP and DOWN arrows 
simultaneously for three (3) seconds. After 
3 seconds, the CHANNEL SETUP screen 
appears (see Figure 21). Select a channel.

UM-3/R6/AA

UM-3/R6/AA

BATTERY

1.5V x 2