Avaya S8100 Benutzerhandbuch
1 Install and cable a G600 cabinet
Cable a G600 system
82
S8100 Installation and Upgrades
November 2003
Figure 15: TDM-/LAN-bus cable routing slot plate removal
5
Pull open the EMI gasket, and pass the TDM-/LAN-bus cable through the routing slots in both
cabinets. Push the free end of the EMI gasket back in place. See
cabinets. Push the free end of the EMI gasket back in place. See
!
WARNING:
Be sure to install each TDM-/LAN-bus cable connector with the arrow on its back pointing upward.
6
Install the lower connector of the TDM-/LAN-bus cable on the right TDM-/LAN-bus pin field in
Cabinet A.
Cabinet A.
7
Install the upper connector of the TDM-/LAN-bus cable on the right TDM-/LAN-bus pin field in
Cabinet B.
Cabinet B.
Figure notes
1
Cabinet B’s routing slot plate.
2
Cabinet A’s routing slot plate.
cadptdm3 KLC 102600
A
B
TO
P
TO
P
1
2
2
1