Avaya S8100 Manuale Utente

1 Install and cable a G600 cabinet

Cable a G600 system

S8100 Installation and Upgrades

November 2003

Figure 15: TDM-/LAN-bus cable routing slot plate removal

Pull open the EMI gasket, and pass the TDM-/LAN-bus cable through the routing slots in both
cabinets. Push the free end of the EMI gasket back in place. See

Figure 16, TDM-/LAN-bus cable

routed from Cabinet A to Cabinet B,

on page 83.

WARNING:

Be sure to install each TDM-/LAN-bus cable connector with the arrow on its back pointing upward.

Install the lower connector of the TDM-/LAN-bus cable on the right TDM-/LAN-bus pin field in
Cabinet A.

Install the upper connector of the TDM-/LAN-bus cable on the right TDM-/LAN-bus pin field in
Cabinet B.

Figure notes

Cabinet B’s routing slot plate.

Cabinet A’s routing slot plate.

cadptdm3 KLC 102600