Benutzerhandbuch für Compaq COM-2(PC)F

Inhaltsverzeichnis

• 1. Introduction

  1
• About the COM-2(PC)F Board

  1
• Support Software of Option

  1
• Features

  1
• Limited Three-Year Warranty

  2
• How to Obtain Service

  2
• Liability

  2
• About the Manual

  3
• 2. How to Use the Board

  5
• Compatible Mode and Enhanced Mode

  5
• Compatible Mode

  5
• Enhanced Mode

  5
• Operating under Windows Me/98

  6
• Procedure

  6
• Operating under Windows 95

  10
• Procedure

  10
• Operating under Windows 2000

  14
• Procedure

  14
• Operating under Windows NT

  18
• Procedure

  18
• Operating under Windows 3.1

  19
• Procedure

  19
• Operating under MS-DOS

  20
• Procedure

  20
• 3. Hardware Setup

  23
• Names of Board Components

  23
• I/O Address Setting

  24
• Setting Procedure

  25
• Interrupt Level Setting

  26
• Setting Procedure

  26
• Mounting Method

  28
• Connecting the External Devices

  31
• Connecting the Cable

  32
• 4. System Reference

  33
• Specifications

  33
• Circuitry Diagrams

  34
• Block Diagram

  34
• 5. Troubleshooting

  35
• QUESTIONS:

  35
• Is the pilot light on?

  35
• Did the system boot up?

  35
• Does your program work?

  35
• Does the sample program work?

  36
• Is the input data accurate?

  36
• Still have a probrem?

  36
• 6. Appendix

  39
• A. Sample Programs (for MS-DOS)

  39
• COM-2(PC)F Diskette

  39
• Sample Programs

  40
• Switch and Jumper Settings

  42
• Cable Connection

  44
• B. Notes on Developing Driver Software

  56
• Internal Registers

  56
• Baud Rate Selection

  57
• LSI Recovery Time

  58
• Mode and Compatible Mode

  60
• C. The Details on NS16550

  62
• and COM-2(PC)V

  64
• 7. Index

  65
• Settings

  23
• Figure 3.2. I/O Address DIP Switch

  25
• Figure 3.3. Interrupt Level Settings

  26
• Figure 3.4. Rear Panel of IBM-PC/AT

  28
• Figure 3.5. Removing the Cover

  28
• Figure 3.6. Expansion Slot Cover

  29
• Figure 3.7. Anchoring the COM-2(PC)F

  30
• Figure 3.8. Interface Connectors (CN1 and CN2)

  31
• Figure 3.9. CN1 and CN2 Pin Assignments

  31
• Figure 3.10.Example Connection to a Modem

  32
• Figure 3.11.Example Connection to a PC

  32
• Figure 3.12.Example Connection to a Device

  32
• Figure 4.1. Circuitry Diagrams

  34
• Figure 4.2. COM-2(PC)F Block Diagram

  34
• Figure 6.1. Floppy Disk Files

  40
• Figure 6.2. 9-pin Connector Diagram

  44
• Figure 6.3. Flowchart of Sample Program 1

  45
• Figure 6.4. Flowchart of Sample Program 2

  46
• Figure 6.5. Flowchart of Sample Program 3

  47
• Figure 6.6. Flowchart of Sample Program 4

  48
• Figure 6.7. Flowchart of Sample Program 5

  49
• Figure 6.8. Flowchart of Sample Program 6

  50
• Figure 6.9. Flowchart of Sample Program 7

  51
• Figure 6.10.Flowchart of Sample Program 8

  52
• Figure 6.11.Flowchart of Sample Program 9

  53
• Figure 6.12.Flowchart of Sample Program10

  54
• Figure 6.13.Flowchart of Sample Program 11

  55
• Figure 6.14. IVR Bit Function in Enhanced Mode

  61
• Figure 6.15.Difference in Jumpers (JP1~JP3)

  64
• Languages

  21
• Table 3.1. I/O Address Settings

  25
• Table 3.2. Example Compatible Mode Settings

  27
• Table 4.1. Specifications

  33
• Data Format

  40
• and 5

  42
• and 10

  42
• Function Selection through Internal Registers

  56
• Baud Rate and Divisors

  57
• for the 2EFh Port after Accessing the LSI

  58
• Semiconductor's data book) < 1 / 2 >

  62
• Semiconductor's data book) < 2 / 2 >

  63
• Specifications Differences

  64