Benutzerhandbuch für FARGO electronic HDP700

Inhaltsverzeichnis

• SPECIFICATIONS

  1
• Regulatory Compliances

  1
• Agency Listings

  1
• Technical Specifications

  1
• GENERAL TROUBLESHOOTING

  2
• Contacting FARGO Technical Support

  2
• LCD Display Messages

  2
• Communications Errors

  2
• System does not meet requirements

  2
• A driver or application is conflicting with the FARGO driver

  2
• Using an inadequate data cable

  2
• Interference from an external device

  2
• Cannot print from application

  2
• Parallel port mode set incorrectly

  2
• Inadequate hard drive space

  2
• Card Feed Errors

  2
• are feeding improperly

  2
• Card is stalling on or at the feed rollers

  2
• Card jamming on the Flipper Table

  2
• Printer is unable to align flipper

  2
• Card feeds improperly off the Flipper Table

  2
• Encoding Errors

  2
• No ENC Response

  2
• No Mag Encoder

  2
• Mag Encode Failed

  2
• Card Jam: Mag

  2
• No Smart Encoder

  2
• Smart Encode Failed

  2
• Card Jam: Smart

  2
• Unable to read encoded data

  2
• Data intended for the magnetic stripe was printed on the card

  2
• Printing Process Errors

  2
• Aligning Ribbon Error

  2
• Print Ribbon

  2
• Print Ribbon Out

  2
• Wrong Print Ribbon

  2
• Head Lift

  2
• Printer pausing between panels

  2
• Printhead Temp

  2
• Printer Open

  2
• Transfer Process Errors

  2
• Transfer Film Drive Error

  2
• Laminator Cooling Error

  2
• Card Jam

  2
• Temperature Timeout

  2
• Transfer Lift

  2
• Output Errors

  2
• Cards feed into the Output Stacker, but are not lifted up into place

  2
• Diagnosing Image Problems

  2
• Pixel Failure

  2
• Card Surface Debris

  2
• Incorrect Image Darkness

  2
• Ribbon Wrinkle

  2
• Excessive Resin Printing

  2
• Incomplete Resin Printing

  2
• HDP Film Wrinkle

  2
• Incomplete Transfer

  2
• Image Placement

  2
• Poor Image Quality

  2
• Image Washout on Film

  2
• Registration problems

  2
• Image Skewed on the Card

  2
• PRINTER ADJUSTMENTS

  3
• Safety Messages

  3
• Fine Tuning the Card Separator Adjustment Assembly

  3
• Using FARGO HDP Technology to Print on Alternate Card Stocks

  3
• Device Options Tab

  3
• Ribbon Type

  3
• Color Matching

  3
• Resin Dither

  3
• Print Both Sides

  3
• Split 1 Set of Ribbon Panels

  3
• Print Back Side Only

  3
• Rotate Front 180 Degrees

  3
• Rotate Back 180 Degrees

  3
• Disable Printing

  3
• Buffer Single Card

  3
• Image Color Tab

  3
• Image Transfer Tab

  3
• Image Position

  3
• Transfer Dwell Time and Temperature

  3
• Flattener Temperature

  3
• K Panel Resin Tab

  3
• Defining an Area

  3
• Magnetic Encoding

  3
• Overview

  3
• Encoding Mode/ Coercivity/ Magnetic Track Selection

  3
• Magnetic Track Options

  3
• Verification

  3
• Shift Data Left

  3
• ISO Track Locations

  3
• Sending Track Information

  3
• Card Tab

  3
• Card Size

  3
• Card Type

  3
• Orientation

  3
• Copies

  3
• Test Print

  3
• About

  3
• Cleaning the Printer

  3
• Cleaning the Printhead

  3
• Cleaning the Platen Rollers

  3
• Clean the Inside of the Printer

  3
• Clean the Cleaning Rollers

  3
• PARTS REPLACEMENT

  4
• Removing the Covers

  4
• Print Station Cover

  4
• Front Transfer Cover

  4
• Rear Transfer Cover

  4
• Base Module Cover

  4
• Card Input Hopper Cover

  4
• Card Output Hopper Cover

  4
• Back Cover

  4
• Replacing the Control Panel Assembly Components

  4
• Replacing the Printhead Assembly Components

  4
• Printhead (D840854)

  4
• Fan Assembly (840134)

  4
• Head Force Spring (840272)

  4
• Ribbon Deflector (D840638)

  4
• Replacing the Print Station Components

  4
• O-Rings (140212)

  4
• Ribbon Sensor Board Assembly (140407)

  4
• Encoder Wheel (810492)

  4
• Ribbon Sensor Array Assembly (840108)

  4
• Ribbon Supply Motor Assembly (D840980)

  4
• Ribbon Take-Up Motor Assembly (D840980)

  4
• Headlift Motor Assembly (840131)

  4
• Ribbon Supply Encoder Sensor Assembly (D840982)

  4
• Headlift Sensor Assembly (D840983)

  4
• Replacing the Transfer Station Components

  4
• Film Drive O-Rings (140212)

  4
• Encoder Wheel (810492)

  4
• Stepper Motor Assembly (840123)

  4
• Lamination Supply Encoder Sensor Assembly (840135)

  4
• Lamination Take-Up Encoder Sensor Assembly (840136)

  4
• Lower Film Sensor Assembly (840199)

  4
• Upper Film Sensor Assembly (D841023)

  4
• Print Platen Roller (840319)

  4
• Transfer Peel Off Bar Assembly (840253)

  4
• Ribbon Drive Hub (840324)

  4
• Transfer Station Assembly (840152)

  4
• Lamination Assembly (840159)

  4
• Transfer Lift Switch (840142)

  4
• Transfer Lift Motor (840132)

  4
• Replacing Belt Driven Base Module Components

  4
• Drive Belt – Platen Roller to Card Feed Roller (220071)

  4
• Drive Belt – Card Feed Roller to Card Feed Roller (220082)

  4
• Stepper Motor Assembly (840164)

  4
• Compound Grooved Pulley (8402328)

  4
• Pinch Roller Spring Plate-Front (840354)

  4
• Pinch Roller Spring Plate-Back (840354)

  4
• Drive Belt – Tensioner to Platen Roller (F000003)

  4
• Drive Belt – Stepper Motor to Tensioner (F000004)

  4
• Main Pulley – Front (D850190)

  4
• Main Pulley – Back (D850190)

  4
• Belt (F000018)

  4
• Base Module (840151)

  4
• Replacing the Gear Driven Base Module Components

  4
• Drive Belt – Platen Roller to Card Feed Roller (220071)

  4
• Drive Belt – Card Feed Roller to Card Feed Roller (220082)

  4
• Stepper Motor Assembly (840164)

  4
• Pinch Roller Spring Plate - Front Input Side (840354)

  4
• Pinch Roller Spring Plate - Front Output Side (840354)

  4
• Pinch Roller Spring Plate - Back Output Side (840354)

  4
• Pinch Roller Spring Plate – Back Input Side (840354)

  4
• Main Pulley (D850190)

  4
• Gear – Card Transport (760330)

  4
• Compound Gear (D841032)

  4
• Base Module (840151)

  4
• Replacing the Card Input Hopper Components

  4
• Flipper Table Home Sensor Board Assembly (140407)

  4
• Card Low Sensor Board Assembly (140407)

  4
• Card Feed Belt (220082)

  4
• Cleaning Roller Drive Idler Gear (760401)

  4
• Card Feed Gear (810271)

  4
• Encoding Feed Motor Assembly (840100)

  4
• Cleaning Roller Assembly (840102)

  4
• Flipper Table Position Stepper Motor (840124)

  4
• Card Feed Motor Assembly (840198)

  4
• Clutch Spring (840285)

  4
• Card Sensor Assembly – Flipper Table (D840624)

  4
• Card Feed Sensor (D840625)

  4
• Magnetic Encoder Head (840104)

  4
• Encoder Card Sensor (140407)

  4
• Replacing the Power Assembly Components

  4
• Power Switch (120011)

  4
• Power Cord Receptacle (130067)

  4
• Main Print Board (A000030)

  4
• Lamination Board (140402)

  4
• Power Supply (150240)

  4
• Replacing the Output Stacker Components

  4
• Output Stacker (D840590)

  4
• Stacker Full Sensor (140407)

  4
• Stacker Lift Motor (840130)

  4
• PACKING YOUR HDP700 CARD PRINTER

  5
• BOARD LEVEL DIAGNOSTICS

  6
• Board Errors

  6
• EE Memory Error

  6
• EE Checksum Error

  6
• DRAM Memory Error

  6
• RAM Memory Error

  6
• FPGA

  6
• Update Firmware Now

  6
• Sensor Testing

  6
• LCD ON-LINE MENU NAVIGATION

  7
• Entering the LCD On-Line Menu and Selecting an Option

  7
• Print Test Image

  7
• Setup Printer

  7
• Preparing to adjust the Print Offset, Transfer TOF, and Transfer EOF

  7
• Adjusting the Transfer Tension

  7
• Aligning the Print Offset

  7
• Setting the Transfer TOF

  7
• Setting the Transfer EOF

  7
• Adjusting the Film Drive

  7
• Adjusting the Ribbon Tension

  7
• Adjusting the Ribbon Drive

  7
• Adjusting the Transfer Temperature

  7
• Setting the Flattener Temperature

  7
• Setting the Printhead Resistance

  7
• Adjusting the Image Darkness

  7
• Changing the Encoder Settings

  7
• Setting the Magnetic TOF

  7
• Adjusting the Flipper Offset

  7
• Show Error Count

  7
• Show Card Count

  7
• System Upgrade

  7