Benutzerhandbuch für Lincoln Electric SVM150-A

Inhaltsverzeichnis

• Table of Contents

  6
• Safety

  2
• Section A - Installation

  7
• Section B - Operation

  15
• Section C - Accessories

  25
• Section D - Maintenance

  35
• Section E - Theory of Operation

  43
• Section F - Troubleshooting & Repair

  51
• Symptoms

  54
  • Major physical or electrical damage is evident.

    54
  • No welding output in all modes. The engine operates normally. The auxiliary output is normal.

    54
  • No welding output in all modes. The engine operates normally. The auxiliary output is normal. (continued)

    55
  • No welding output in all modes. Also no auxiliary power. The engine operates normally at approximately 3700 RPM.

    55
  • No auxiliary power at the receptacles. The welding output is normal...

    56
  • The machine has welding output but no control of output in some or all modes. The auxiliary power is normal.

    56
  • The machine has low welding output and low auxiliary output.

    57
  • The machine control is still active when the remote control unit is connected.

    57
  • Machine seems to be locked into the CC mode of operation (stick mode.)

    57
  • The wire feeder does not work when connected to the welder amphenol.

    58
  • The battery does not stay charged.

    58
  • The engine will not crank when the start button is pushed.

    59
  • The engine cranks but will not start.

    59
  • The engine will not develop full power.

    59
  • The engine shuts down shortly after starting.

    60
  • The engine will not idle down to low speed. The machine has normal weld output and auxiliary power.

    60
  • The engine will not go to high idle when using the auxiliary power. Auxiliary power is normal when the IDLER switch is ...

    60
  • The engine will not go to high idle when attempting to weld or when the auxiliary power is loaded.

    61
  • The machine goes to low idle but does not stay at low idle.

    61
  • The welding arc is “cold.” The engine runs normally. The auxiliary power is normal.

    62
• Section G - Electrical Diagrams

  119