Benutzerhandbuch für mitutoyo lsm-9506

Inhaltsverzeichnis

• INTRODUCTION

  1
• 1.1 Outline

  1
• 1.2 Foreword

  1
• 1.3 Nomenclature

  1
• 1.3.1 Display Unit

  1
• 1.3.2 Measuring Unit

  1
• SETUP

  2
• 2.1 Unpacking and Acceptance Check

  2
• 2.2 Connecting the Cables

  2
• 2.3 Preliminary Checks

  2
• 2.4 Initializing the LSM-9506

  2
• DISPLAYS AND KEY OPERATIONS

  3
• 3.1 Outline of the Operation Modes

  3
• 3.1.1 Outline of the Operation Modes

  3
• 3.1.1.1 Overview

  3
• 3.1.1.2 Setting the segment

  3
• 3.1.1.3 Measurement interval (measurement time)

  3
• 3.1.2 Outline of the Operation Modes

  3
• 3.1.2.1 Basic setup mode

  3
• 3.1.2.2 Calibration mode

  3
• 3.1.2.3 Measuring condition setup mode

  3
• 3.1.2.4 Other setup mode

  3
• 3.1.2.5 Statistic display mode

  3
• 3.1.2.6 Measurement mode

  3
• 3.2 Techniques and Terminology of Setup Functions

  3
• 3.2.1 Program

  3
• 3.2.2 Basic setup

  3
• 3.2.3 Function setup

  3
• 3.2.4 Setups according to the property of each workpiece

  3
• 3.2.4.1 Transparent object (Workpiece that transmits light)

  3
• 3.2.5 Latch (holding) of the displayed value

  3
• 3.2.6 Automatic measurement with an edge specification

  3
• 3.2.7 GO/NG judgment

  3
• 3.2.8 Abnormal data elimination

  3
• 3.2.9 Offset/Zero-set

  3
• 3.2.10 Mastering

  3
• 3.2.11 Reference value

  3
• 3.2.12 Data output conditions

  3
• detection method>

  3
• 3.2.14 Group judgment

  3
• 3.2.15 Recording the amount of light

  3
• 3.3 Outline of the Display Contents

  3
• 3.3.1 Display unit

  3
• 3.3.2 Data display unit

  3
• 3.4 Outline of Key Operations

  3
• 3.4.1 Description of key functions

  3
• 3.4.2 Example key operations

  3
• SETTING UP THE MEASURING CONDITIONS

  4
• 4.1 Basic Setup

  4
• 4.1.1 Outline of the basic setup procedure

  4
• 4.1.2 Description of each mode

  4
• 4.1.2.1 Selecting and setting the function in the B0 mode

  4
• a. Setting the resolution (Guidance: RES)

  4
• (Guidance: (,))

  4
• d. Setting the buzzer function (Guidance: BUZZER)

  4
• e. Setting the display latch timer (Guidance: LATCH)

  4
• 4.1.2.2 Selecting and setting the function in the B1 mode

  4
• (Guidance: D.OUT)

  4
• (Guidance: ERR-0 D)

  4
• measurement (Guidance: RUN D)

  4
• d. Selecting the averaging method (Guidance: AVG.M)

  4
• (Guidance: JDG.M)

  4
• reference value (Guidance: COPY)

  4
• 4.1.2.3 Selecting and setting the function in the B2 mode

  4
• a. Setting the workpiece type (Guidance: WORK.P)

  4
• (Guidance: PROG)

  4
• (Guidance: SEG)

  4
• 4.1.2.4 Selecting and setting the function in the B3 mode

  4
• (Guidance: ADE)

  4
• (Guidance: AWDT)

  4
• c. Setting the number of scans (Guidance: SCAN)

  4
• d. Setting the group judgment (Guidance: GTJ)

  4
• (Guidance: GTJ D)

  4
• 4.1.2.5 Selecting and setting the function in the B4 mode

  4
• (Guidance: RS-232C)

  4
• (Guidance: BAUD)

  4
• (Guidance: LENGTH)

  4
• (Guidance: PARITY)

  4
• (Guidance: DELIMT)

  4
• (Guidance: CONTRL)

  4
• 4.1.2.6 B5: Reserved

  4
• 4.1.2.7 Selecting and setting the function in the B6 mode

  4
• a. Setting the use of DCU (Guidance: DCU)

  4
• Calibration

  4
• 4.2.1 Calibration gages and gage stand

  4
• 4.2.2 Entering the calibration mode

  4
• Positioning a Gage or a Workpiece

  4
• How to read-in the amount of light

  4
• Setting Up the Functions

  4
• 4.5.1 Outline of the function setup mode

  4
• 4.5.2 Outline of each function setup mode

  4
• 4.5.3 Function setup mode

  4
• 4.5.3.1 F0: Setting the segment

  4
• (measurement time)

  4
• 4.5.3.3 F2: Setting the GO/NG judgment criteria

  4
• 4.5.3.4 F3: Setting the reference value

  4
• 4.5.3.5 F4: Setting the offset value

  4
• 4.5.3.6 F5: Setting the data output conditions

  4
• 4.5.3.7 F6: Setting the sample measurement

  4
• 4.5.3.8 F7: Automatic workpiece detection setting

  4
• 4.5.3.9 F8: Setting the group judgment

  4
• 4.5.3.10 Confirming the function setup contents

  4
• MEASUREMENT MODE

  5
• 5.1 Outline of the Measurement Mode

  5
• 5.1.1 Setup in the measurement mode

  5
• 5.1.1.1 Setup operation from the arrow key

  5
• 5.2 Other Functions

  5
• 5.2.1 Key lock

  5
• 5.2.2 Displaying the measuring position

  5
• 5.3 Applied Measurement

  5
• 5.3.1 OD measurement of a precision-machined workpiece

  5
• 5.3.2 Measurement of magnet coil wire that runs at high speed

  5
• 5.3.3 Measurement of the lead pitch of a multiple-pin IC

  5
• 5.3.4 Applied Measurement with Offset/Zero-Set Functions

  5
• 5.3.5 Sample measurement

  5
• 5.3.6 Applied measurement with automatic workpiece detection

  5
• 5.3.7 Applied measurement on a stepped round bar

  5
• INTERFACE UNIT

  6
• 6.1 RS-232C Interface

  6
• 6.1.1 Specifications

  6
• 6.1.2 Connections

  6
• 6.1.3 Printer interface

  6
• 6.1.3.1 Setting the printer

  6
• 6.1.3.2 Setting the LSM-9506

  6
• 6.1.4 RS-232C commands

  6
• 6.1.5 List of commands

  6
• 6.1.6 List of response commands if an error occurs

  6
• 6.1.7 Format of response commands

  6
• 6.1.8 Other commands

  6
• 6.1.9 Details of command descriptions

  6
• 6.1.10 An example Program of RS-232C Communication

  6
• 6.2 Digimatic Output Unit interface

  6
• 6.2.1 Method of use

  6
• 6.2.2 I/O specifications

  6
• 6.2.3 Timing chart

  6
• 6.2.4 Data format

  6
• INSPECTION AND MAINTENANCE

  7
• 7.1 Display Unit

  7
• 7.1.1 Display check

  7
• 7.1.2 Cleaning method

  7
• 7.2 Measuring Unit

  7
• 7.2.1 Cleaning optical parts

  7
• 7.2.2 Replacement of protection glass

  7
• 7.3 Error Messages and Remedies

  7
• 7.4 Troubleshooting and Remedies

  7
• 7.5 Fuse replacement

  7
• SPECIFICATIONS

  8
• 8.1 Specifications

  8
• TABLES OF THE BASIC SETUP MODES

  9
• 9.1 Restrictions Associated with the Particular Combination of Functions

  9
• 9.2 List of Setup Modes

  9
• 9.2.1 List of basic setup modes

  9
• 9.2.2 List of calibration functions

  9
• 9.2.3 Reading in the amount of light

  9
• 9.2.4 List of function setup modes

  9