BenutzerhandbuchInhaltsverzeichnisOperating Instructions1BP-1002/BP-2002 Beltpacks Audicom Intercom Systems1FIGURE 1. BP-2002 & BP-1002 Connections and Controls6External Connections and Controls71. Volume Control -72. Chan Button and Indicators -73. Call Button and Indicator -74. Talk Button and Indicator -75. Sidetone Control -86. Headset Connector -87. Intercom Channel Connectors -88. Intercom Channel Connectors -8System Power9Initial BP-1002/2002 Setup9Operating Modes9Changing Modes of Operation109. Press and hold the Talk key, and then press and hold the Call key.1010. Release both keys. The Call indicator should now glow red. (The number of beeps heard in the headset indicates the current mode of operation.)1011. Press the Call key to change to the next mode of operation. Each press of the Call key will cause the BP-1002/2002 to change to the next mode of operation.1012. When the desired mode is reached, press the Talk key to select that mode and exit the mode changing function. Beeps will be ...10TABLE 1. Modes of Operation10Internal Switches, Jumpers and Adjustments10FIGURE 2. Internal Switches, Jumpers, and Adjustments11Sidetone Adjustment (R145)11Mic Gain Adjustment (R156)11> Using a Phillips head screw driver, turn the Mic Gain pot clockwise to increase the gain (or counter-clockwise to decrease the gain).12Clear-Com Setup12BP-1002/200212> SW1 must be placed in the UNBAL position.12TABLE 2. Internal Switches and Jumpers12Connector Pin Configurations13Specifications14Optional Football Modifications15General Description15Eliminating Mic-Kill and Call Signal151. Before making changes to the printed circuit board, disconnect all power and line connections from the beltpack.152. Refer to Figure 3 and locate C61 on the underside of the printed circuit board.153. Remove capacitor C61 from the printed circuit board.15Restoring Mic-Kill and Call Signal15FIGURE 3. Printed Circuit Board16Notes17Größe: 279 KBSeiten: 18Language: EnglishHandbuch öffnen