Manuais de utilizador para Telex BP-1002

índice analítico

• Operating Instructions

  1
• BP-1002/BP-2002 Beltpacks Audicom Intercom Systems

  1
  • FIGURE 1. BP-2002 & BP-1002 Connections and Controls

    6
  • External Connections and Controls

    7
    • 1. Volume Control -

      7
    • 2. Chan Button and Indicators -

      7
    • 3. Call Button and Indicator -

      7
    • 4. Talk Button and Indicator -

      7
    • 5. Sidetone Control -

      8
    • 6. Headset Connector -

      8
    • 7. Intercom Channel Connectors -

      8
    • 8. Intercom Channel Connectors -

      8
• System Power

  9
• Initial BP-1002/2002 Setup

  9
• Operating Modes

  9
  • Changing Modes of Operation

    10
    • 9. Press and hold the Talk key, and then press and hold the Call key.

      10
    • 10. Release both keys. The Call indicator should now glow red. (The number of beeps heard in the headset indicates the current mode of operation.)

      10
    • 11. Press the Call key to change to the next mode of operation. Each press of the Call key will cause the BP-1002/2002 to change to the next mode of operation.

      10
    • 12. When the desired mode is reached, press the Talk key to select that mode and exit the mode changing function. Beeps will be ...

      10
    • TABLE 1. Modes of Operation

      10
• Internal Switches, Jumpers and Adjustments

  10
  • FIGURE 2. Internal Switches, Jumpers, and Adjustments

    11
  • Sidetone Adjustment (R145)

    11
  • Mic Gain Adjustment (R156)

    11
    • > Using a Phillips head screw driver, turn the Mic Gain pot clockwise to increase the gain (or counter-clockwise to decrease the gain).

      12
  • Clear-Com Setup

    12
    • BP-1002/2002

      12
      • > SW1 must be placed in the UNBAL position.

        12
    • TABLE 2. Internal Switches and Jumpers

      12
• Connector Pin Configurations

  13
• Specifications

  14
• Optional Football Modifications

  15
  • General Description

    15
  • Eliminating Mic-Kill and Call Signal

    15
    • 1. Before making changes to the printed circuit board, disconnect all power and line connections from the beltpack.

      15
    • 2. Refer to Figure 3 and locate C61 on the underside of the printed circuit board.

      15
    • 3. Remove capacitor C61 from the printed circuit board.

      15
  • Restoring Mic-Kill and Call Signal

    15
    • FIGURE 3. Printed Circuit Board

      16
• Notes

  17