Benutzerhandbuch für Troy-Bilt 469

Inhaltsverzeichnis

• NOTE: Make sure not to crimp cables while removing loose parts or the entire unit from the carton.

  7
• NOTE: Reference to right or left hand side of the mower and/or front or behind the mower is observed from the operating position.

  7
  • Figure 1

    7
  • Figure 2

    7
• NOTE: Make sure to route the cables inside the lower handle. Also do not crimp the cables while lifting the handle up.

  7
  • Figure 3

    7
  • Figure 4

    8
• NOTE: If the grass catcher came pre-assembled, proceed to the next section. If not, follow the steps below to assemble it before attaching to the mower.

  8
  • Figure 5

    8
  • Figure 6

    8
  • Figure 7

    8
  • Figure 8

    9
• NOTE: See your engine manual packed with your unit for more detailed instructions.

  10
• NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit. These may cause damage to pulleys, bearings, or the engine. The use of water will result in shortened life and reduce serviceability.

  11
  • Figure 9 : Lubrication Chart

    11
  • Figure 10

    12
• NOTE: An unbalanced blade will cause excessive vibration when rotating at high speeds, may cause damage to the mower and could break, causing personal injury. Test the blade by balancing it on a round shaft screwdriver or a blade balancer.

  12
  • Figure 11

    13
  • Figure 12

    13
  • Figure 13

    13
  • Figure 14

    14
  • Figure 15

    14
• NOTE: Dirty air cleaner may cause an engine to run rough.Before adjusting carburetor, check air cleaner.

  14
• NOTE: If storing in an unventilated or metal storage shed, be certain to rustproof the equipment by coating with a light oil or silicone.

  14
• NOTE: For repairs beyond the minor adjustments listed above, contact your local authorized service dealer.

  15