用户手册目录NOTE: Make sure not to crimp cables while removing loose parts or the entire unit from the carton.7NOTE: Reference to right or left hand side of the mower and/or front or behind the mower is observed from the operating position.7Figure 17Figure 27NOTE: Make sure to route the cables inside the lower handle. Also do not crimp the cables while lifting the handle up.7Figure 37Figure 48NOTE: If the grass catcher came pre-assembled, proceed to the next section. If not, follow the steps below to assemble it before attaching to the mower.8Figure 58Figure 68Figure 78Figure 89NOTE: See your engine manual packed with your unit for more detailed instructions.10NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit. These may cause damage to pulleys, bearings, or the engine. The use of water will result in shortened life and reduce serviceability.11Figure 9 : Lubrication Chart11Figure 1012NOTE: An unbalanced blade will cause excessive vibration when rotating at high speeds, may cause damage to the mower and could break, causing personal injury. Test the blade by balancing it on a round shaft screwdriver or a blade balancer.12Figure 1113Figure 1213Figure 1313Figure 1414Figure 1514NOTE: Dirty air cleaner may cause an engine to run rough.Before adjusting carburetor, check air cleaner.14NOTE: If storing in an unventilated or metal storage shed, be certain to rustproof the equipment by coating with a light oil or silicone.14NOTE: For repairs beyond the minor adjustments listed above, contact your local authorized service dealer.15文件大小: 2.7 MB页数: 20Language: English打开用户手册