Oregon Scientific PE828 User Manual

9

EN

If after the initial setting of the clock / user profile (as
detailed in previous section), you wish to change the clock
time or edit one of the user profile settings, simply:

1. Press  MODE  to navigate to Clock or User Profile

Mode.

2. Profile Mode only; use   / 

 to scroll to the setting

you wish to change.

3. Press and hold SET to enter setting mode.

4. Press   /   to change a value and SET to confirm.

When in the Clock Mode, press   to toggle between the
Clock and Alarm Mode.

1. Press MODE to navigate to Clock Mode.

2. Press   to switch

to Alarm Mode.

3. Press and hold SET to enter the setting mode.

4. Press   / 

 to change a value and SET to confirm

and move on to the next setting.

5. The setting sequence is:

•

Hour

•

Minute

•

On / Off

To stop the alarm sound, press any key

 For first-time use, or after replacing a battery or

resetting the unit, user must calibrate stress index
baseline, otherwise no valid reading can be obtained.

The index is highly individual, so you need to calibrate
your personal baseline before you use this function to
monitor your stress status.

Make sure

 you

 relax for 2 to 3 minutes before you start

the calibration:

1. Press 

 to enter Pulse Mode.

2. Press   to enter

calibration setting.

3. Press and hold SET to start calibration.

PE82X_M_EN_V2.p65

2005.7.19, 12:17 PM

9