Oregon Scientific PE828 ユーザーズマニュアル
9
EN
CHANGE INDIVIDUAL CLOCK OR USER
PROFILE SETTINGS
PROFILE SETTINGS
If after the initial setting of the clock / user profile (as
detailed in previous section), you wish to change the clock
time or edit one of the user profile settings, simply:
detailed in previous section), you wish to change the clock
time or edit one of the user profile settings, simply:
1. Press MODE to navigate to Clock or User Profile
Mode.
2. Profile Mode only; use /
to scroll to the setting
you wish to change.
3. Press and hold SET to enter setting mode.
4. Press / to change a value and SET to confirm.
ALARM
When in the Clock Mode, press to toggle between the
Clock and Alarm Mode.
Clock and Alarm Mode.
To set the alarm:
1. Press MODE to navigate to Clock Mode.
2. Press to switch
to Alarm Mode.
3. Press and hold SET to enter the setting mode.
4. Press /
to change a value and SET to confirm
and move on to the next setting.
5. The setting sequence is:
•
Hour
•
Minute
•
On / Off
To stop the alarm sound, press any key
PULSE METER / STRESS INDEX (
AVAILABLE
IN PE826 ONLY)
For first-time use, or after replacing a battery or
resetting the unit, user must calibrate stress index
baseline, otherwise no valid reading can be obtained.
baseline, otherwise no valid reading can be obtained.
To calibrate your stress index baseline:
The index is highly individual, so you need to calibrate
your personal baseline before you use this function to
monitor your stress status.
your personal baseline before you use this function to
monitor your stress status.
Make sure
you
relax for 2 to 3 minutes before you start
the calibration:
1. Press
to enter Pulse Mode.
2. Press to enter
calibration setting.
3. Press and hold SET to start calibration.
PE82X_M_EN_V2.p65
2005.7.19, 12:17 PM
9