IBM 13M3200 User Manual

P/N: 55P5776

Cause 1: The converter box is not connected to the proper

connector of the graphics card.

Action 1: Connect the converter box to the connector supporting

DVI Dual Link output, referring to the instructions in Chapter 2.

Cause 2: The monitor's EDID setting is incorrect.

Action 2: Set the correct value for your graphics card, referring

to the T221 Flat-Panel Monitor Users Guide. Restart the system

after making any changes.

Cause 3: You are using an unsupported graphics card, or the

device driver is downlevel.

Action 3: Check that the graphics card is a supported type and

that the latest level device drivers are being used (see the T221

Flat-Panel Monitor Users Guide for further information & details

on how to access the web support page).

The wrong display mode is

displayed.

Cause 4: The graphics card setting is incorrect.

Action 4: Some graphics cards may require the video output

setting changed, by using a software program associated with the

graphics card. For the detail, refer to the user ’s manual for the

graphics card.

The Color Management Utility

or the Firmware Update

Utility does not work.

Cause 1: The USB cable is connected to the connector B of the

monitor.

Action 1: Disconnect the USB cable, and then connect the USB

cable to the converter box that is connected to the connector A of

the monitor.