Yamaha RX-A1030BL User Manual

CONFIGURATIONS

➤ Configuring the system settings (ADVANCED SETUP menu)

En

Configure the system settings of the unit while viewing the front display.

While holding down STRAIGHT on the front panel, press MAIN ZONE z.

Press MAIN ZONE z to set the unit to standby mode and turn it on 
again.

The new settings take effect.

Change the unit’s speaker impedance settings depending on the impedance of the 
speakers connected.

MAIN ZONE z

STRAIGHT

PROGRAM

SPEAKER IMP.

Changes the speaker impedance setting.

REMOTE SENSOR

Turns on/off of the remote control sensor on the main unit.

REMOTE CON AMP

Selects the unit’s remote control ID.

TUNER FRQ STEP

(Asia and General models only)
Changes the FM/AM tuning frequency setting.

TV FORMAT

Switches the video signal type.

MONITOR CHECK

Removes the limitation on HDMI video output.

RECOV./BACKUP

Creates backup of the settings of the unit, or recovers the settings 
from the backup.

INITIALIZE

Restores the default settings.

FIRM UPDATE

Updates the firmware.

VERSION

Checks the version of firmware currently installed on the unit.

6 

 MIN

Select this option when you connect 6-ohm speakers to the unit. You 
can also use 4-ohm speakers as the front speakers.

8 

 MIN (default)

Select this option when you connect 8-ohm or higher speakers to the 
unit.

SPIMP.-

         8  M I N

 S P E A K E R  I M P .