Chief Manufacturing MSP-DCCMD User Manual

 Model MSP-DCCMD

Installation Instructions

1. Select six M4 screws (80) and six spacers (190) from 

parts bag.

2. Place display face down on a clean dry surface.

3. Install six M4 screws (80) into the six mounting holes 

on the interface bracket (140). (see  figure 8)

4. Slide six retaining spacers (190) onto six M4 screws 

(80).

NOTE:   The arrow on the interface bracket (140) must 

point toward the top of the display.

5. Align interface bracket (140), with screws (80) and 

spacers (190), with mounting holes in display back.

6. Tighten all screws.

1. Start two M4 x 8mm Phillips pan head screws (70) into 

the top two mounting holes of the previously attached 
interface bracket. (see  figure 7)

2. Hang the mount from the two screws started in Step 1. 

3. Install the remaining two M4 x 8mm Phillips pan head 

screws (70) into the bottom two mounting holes of the 
display.

4. Secure the display to the mount (Centris bracket) by 

tightening all four M4 x 8mm Phillips pan head screws 
(70). (see  figure 7)

140

80

190

Centris Bracket

Display

70