Precor P10 User Manual
28
Assembling and Maintaining TRM 800-Series Treadmills
8. Secure the fairing assembly using six buttonhead screws
and six washers. Partially tighten the fasteners.
Figure 12: Handrail and console assembly attachment
Completing Assembly
After the upright supports and the fairing are in place, replace
the hood on the treadmill base and finish securing the
fasteners.
CAUTION: Be aware of the handrail extensions when you are
working around the front of the unit. It is easy to bump your head
or sustain other injuries if you ignore the location of the handrail
extensions.
To secure the fasteners:
1. Using an alternating order, tighten the eight fasteners that
1. Using an alternating order, tighten the eight fasteners that
secure the upright supports to the treadmill base.
2. Fully tighten the six screws that secure the console fairing
to the upright supports.