DISH Network 129418 User Manual

10.If the code you entered doesn’t work, do steps 3 through 9 again 

with another device code from the tables.

11.If you cannot find a code that works, try Setting Up Using 

Device Code Scan.

If the code for your device is not listed in the tables on starting page 29, 
use this procedure to scan the remote control’s memory for the device 
code. Here’s what to do:

1. Use the device’s buttons or its remote control to turn the device 

on.

2. Press and hold the mode button for the device you want the 

remote to control, for about three seconds. When all the other 
mode buttons light up, let go of the mode button - that mode 
button should now be flashing. 

For example, hold the TV mode button for a TV until all of the 

other mode buttons light. When you let go, the TV mode light 
will flash.

3. Only for the AUX mode, use the number buttons 

to enter 0 for a second TV, 1 for a second VCR or 
DVD player, or 2 for a tuner or amplifier. Then press 
the STAR (*) button.

4. Press the blank POWER button.

5. Press the up or down arrow button until the 

device turns off. You will have to do this 
repeatedly to scan through all codes. 

Note: The mode button for the device will 
flash rapidly eight times when you’ve 
scanned all the codes for that device.

6. If the remote reaches the correct code, the device 

turns off. When this happens, press the POUND (#) 
button to store the code in the remote.

text_dishpvr.fm  Page 10  Tuesday, March 2, 2004  12:35 PM