DISH Network 129418 User Manual

This remote control gives you easy access to all the features of a DISH 
Network satellite TV receiver. You can set up the remote to control the 
satellite TV receiver and up to three other devices. These devices can 
be a TV, a VCR or DVD player, and a third device.

This user’s guide supports the following remote control models as 
shown on the label on the back of the remote:

• 5.0 - Infrared (IR) only. For use with appropriate IR-controlled 

DISH Network receivers.

• 6.0 - Infrared/Ultra-High Frequency Pro (IR/UHF Pro). For use 

with appropriate UHF Pro-controlled DISH Network receivers. 
The 6.0 remote can be converted to one of three different remote 
types used on a DISH Player-DVR 522 receiver:

With the blue 2 UHF Pro key installed, this remote 
will operate the

 UHF Pro side of the DISH 

Player-DVR 522 receiver. The remote comes with 
this key already installed.

With the green 1 key installed (no UHF Pro 
marking), this remote will operate the 

 IR side 

of the DISH Player-DVR 522 receiver. This remote 
will look and work exactly like a 5.0 IR remote. 
See instructions in Converting the 6.0 Remote.

With the green 1 UHF Pro key installed, this 
remote will operate the 

 side of the DISH 

Player-DVR 522 receiver from a distance using 
UHF Pro. See instructions in Converting the 6.0 
Remote.

If you set up your DISH Player-DVR 522 to operate the 

 side using UHF Pro, the two UHF Pro remotes for 

this receiver will interfere with each other when 
operated at the same time. This may prevent the 
remotes from operating the receiver momentarily.

• 8.0 - Infrared/Ultra-High Frequency Pro (IR/UHF Pro). For use 

with appropriate UHF Pro-controlled DISH Network receivers.

text_dishpvr.fm  Page 2  Tuesday, March 2, 2004  12:35 PM