DISH Network 129418 User Manual

By replacing the key at the bottom of the 6.0 remote, this remote can be 
converted to look and work like a 5.0 IR or to operate like a second 
UHF Pro remote to control the 

 side of the DISH Player-DVR 522 

receiver. The instructions that follow show you how to replace this key. 
After replacing the key, follow the instructions in Setting Up to Control 
the Satellite Receiver.

Note: If you do not need to replace the key, you do not need to 
complete the instructions that follow. Go to Setting Up to Control the 
Satellite Receiver.

1. Slide the battery cover off.

2. Insert your thumbnail in the 

seam between the remote 
control and the blue 2 key to 
separate the key from the 
remote control.

3. Grasp the key at the bottom and pull down firmly to remove.

4. If you are converting the remote 

to look and work like a 5.0 IR 
remote, then turn the removed 
key over with the green 1 side 
up (this key should not have a 
UHF Pro marking). Reinstall 
the key with the green side 
showing. Make sure the key 
snaps in place.

Note: Key 
has no UHF 
Pro marking.

text_dishpvr.fm  Page 4  Tuesday, March 2, 2004  12:35 PM