Panasonic AJ- G User Manual

E-7

!1" RECORDER ENABLE button

For switching between the recorder mode 
and the scene file mode

Recorder mode
Buttons from 

!3" to !8" are operated as 

control buttons for the recording.

Scene file mode
Buttons from 

!3" to !8" are operated as the 

buttons for reading and storing scene 
files. When the power is turned on, the 
unit is in this state.

!2" REC.INH/LOAD button

In recorder mode:
When the lamp is on, the REC S/S button 

!8" 

is inhibited. 
However, even if the unit is in the recording 
inhibition state, operation of the USER 
button assigned REC function and operation 
of the REC button on the camera recorder 
are enabled.
The lamp is off when the power is on.
In scene file mode:
The button is operated as the LOAD switch 
of the scene file. Data are retrieved from the 
file on the remote controller.

!3" REW/1 button

In recorder mode:
This button is operated in the same way as 
the REW button on the camera recorder, 
and the lamp is on when a tape is rewinding.
In the scene file mode:
1 is selected as the number for the scene 
file to be saved or loaded.

!4" FF/2 button

In recorder mode:
This button is operated in the same way as 
the FF button on the camera recorder, and 
the lamp is on when a tape is fast-
forwarding.
In scene file mode:
2 is selected as the number for the scene 
file to be saved or loaded.

!5" STOP/3-button

In recorder mode:
This button is operated in the same way as 
the STOP button on the camera recorder, 
and the lamp is on when a tape stops.
In scene file mode:
3 is selected as the number for the scene 
file to be saved or loaded.

!6" PLAY/4-button

In recorder mode:
This button is operated in the same way as 
the PLAY button on the camera recorder, 
and the lamp is on when a tape is replayed. 
If the button is pressed again during tape 
replay, it changes to replay/pause, and the 
lamp flashes.
If the button is pressed one more time, the 
unit returns to replaying, and the lamp is on 
continuously.
In scene file mode:
4 is selected as the number for the scene 
file to be saved or loaded.

!9"

!3" !4"

!2"

!6" !7"

!5"

!8"

!1"

AJ-RC10G.book  7 ページ  ２００６年７月２６日　水曜日　午前９時２５分