Philips SLV4200/12 User Manual

10

Getting started

b. Plug the adapter into the power 

outlet.

c. The green LED on the front panel 

should be on.

Note: if it is not the case, press the ON/

OFF switch on the back of the product.

5.

Check that TV1 is working well

a. Switch on TV1

b. Check that TV1 is working well.

c. Switch on the connected video 

source for the video source 

chosen.

d. Check if TV1 shows the image of 

the video source.

> The transmitter is connected 

correctly.

The remote control blaster cord 

transmits IR signal to Source devices.

1.

Switch off the transmitter (A).

2.

Connect the remote control blaster 

cord (F) to the IR socket.

3.

Position the blaster light in front of 

the video source. Just put it in front 

of the IR sensor on the front panel.

Note: See the FAQ “How can I find the IR 

sensor on the video source?” for locating 

the IR sensor on the front panel of the 

video source.

Preparation

- Switch on the transmitter (A).