Philips SLV4200/12 User Manual

12

Getting started

Note: If the VCR or DVD recorder 

records a television program, you watch 

the recorded channel.

Note: how to watch a video source on 

TV1?

Use your TV1 and your video source as 

usual to watch a video source on TV1.

Note: In case the video source does not 

react the IR control blaster might not be

installed properly. See the FAQ “How 

source?” for locating the IR sensor on the 

front panel of the video source.

Switch between the two video source

images by pushing the source switch on

the Transmitter.

Depending on your specific situation, 

after completing 3.1 and 3.3, you may

experience some interference.

1.

Find the CHANNEL switch on the 

transmitter (A). There are 4 

channels. You may have to change 

the channels in case of interferences.

2.

Set the CHANNEL switch to a 

different number on the transmitter 

(A) in case of interferences.

3.

Find the CHANNEL switch on the 

receiver (B).

4.

Set the CHANNEL switch to the 

same number as on the transmitter 

(A).

1.

Adjust the orientation of the 

antenna of the receiver for best 

picture.

2.

Best transmission performance you 

obtain when the front sides of the 

transmitter and receiver antennas 

are "faced" to each other in an 

imaginable straight line.