Philips 502-1040510 User Manual

5

Important

EN

G

LI

SH

Your HD receiver is powered using a 12 V power supply unit. Your HD receiver has been

manufactured to meet the appropriate safety standards, but you must follow the below instructions

to operate it safely. Keep these instructions for future reference.

•  Your HD receiver does not contain any user-serviceable parts. Do not attempt to open it. All

maintenance work must be carried out by qualified services centres.

•  Before connecting the 12 V power supply unit to the mains, check that the mains supply voltage

corresponds to the voltage printed on it. If the mains voltage is different, consult your local dealer.

•  The 12 V power supply unit has been designed for indoor use only.

•  Use only the original 12 V power supply unit.

•  To prevent fire or shock hazard, do not expose your HD receiver to rain or moisture.

•  Place your HD receiver on a firm surface, and do not cover the ventilation openings with items

such as newspapers, table clothes, curtains, etc.

•  Do not install your HD receiver near heat sources such as radiators, stoves or other equipment

that produce heat. Protect it from direct sunlight.

•  In order to ensure a free flow of air around your HD receiver, allow at least 5 cm of space above

and around it. This prevents overheating of your HD receiver.

•  Do not place any combustible objects such as candles, etc., on your HD receiver.

•  Never stand objects filled with liquids, such as vases, on top of your HD receiver. Do not place

anything on your HD receiver that might drip or spill into it. If this happens, disconnect the  

12 V power supply unit from the wall socket and have your HD receiver checked at any

authorized service centre.

•  The batteries installed in the remote control should not be exposed to excessive heat such as

sunshine, fire or the like.

Please also pay attention to all the warnings and cautions listed throughout this manual.