Philips 502-1040510 User Manual

Important

6

Your HD receiver is designed to reduce its impact on the environment and complies with the

European Directive 2009/125/EC. This is part of Philips’ ongoing commitment to lead the way in

environmental responsibility.

It has a standby mode of operation that needs very little power. See the table below and please note

that: 

•  When your HD receiver is in the standby mode, you save energy (and therefore money) and

reduce carbon dioxide emissions that damage the environment.

•  You use the standby button on your HD receiver or remote control to switch between on and

standby modes. In addition, if your HD receiver is on, but you do not press any button on it or

your remote control for 3 hours (configurable - see ‘Automatic eco mode’ on page 24), your HD

receiver will automatically get into the standby mode.

•  You use the ON/OFF switch on the rear panel of your HD receiver to turn off your HD receiver.

•  If you are not going to use your HD receiver for several days, you can cut its energy consumption

to zero by unplugging it from the mains wall socket.

•  In the off and standby modes, your HD receiver cannot receive updates from the network.

However, at receiver wake-up, you will be prompted by a message if an update notification has

been received.

Power 

adaptor

unplugged

Not lit up

0

0

Standby

Standby indicator is

red

0.86

15

*

Active

Standby

Standby indicator is

orange

5.00

On

A channel number is

shown on the display

5.80

*

Based on your HD receiver being On for 4 hours daily and being in standby for 20 hours

.