Panasonic AJ-HD1700PE User Manual
204
RS232C SEL
For selecting whether the RS-232C connector
is to function.
is to function.
0000
OFF:
The RS-232C connector does
not function.
not function.
0001
ON:
The RS-232C connector functions.
87
Setup menus
The underlining (__) denotes the factory setting mode.
<INTERFACE>
No./Item
Description of setting
200
PARA RUN
For selecting whether to operate two or more
VTRs in synchronization.
VTRs in synchronization.
0000
DIS:
The VTRs are not operated in
synchronization.
synchronization.
0001
ENA:
The VTRs are operated in
synchronization.
synchronization.
<Note>
To operate the VTRs in synchronization, set all the
VTRs to 1 (ENA). (Refer to pages 14 and 19.)
To operate the VTRs in synchronization, set all the
VTRs to 1 (ENA). (Refer to pages 14 and 19.)
202
ID SEL
For setting what ID information is to be
returned to the controller.
returned to the controller.
0000
OTHER
0001 DVCPRO
0002
0002
ORIG
<Notes>
• For 0 (OTHER), the ID information of VTRs other than
• For 0 (OTHER), the ID information of VTRs other than
DVCPRO models is set.
• Select 2 (ORIG) only when the VTR is connected to a
Panasonic controller (such as the AJ-A900, an
optional accessory).
optional accessory).
• Select 1 (DVCPRO) or 2 (ORIG) if the 23/24 Hz mode
has been selected by system menu item No.25
(SYSTEM FREQ).
(SYSTEM FREQ).
205
BAUD RATE
For setting the RS-232C data transfer speed
(baud rate).
(baud rate).
0000
300
0001
600
0002
1200
0003
2400
0004
4800
0005
9600
207
STOP BIT
For setting the number of RS-232C stop bits.
(Unit: bits)
(Unit: bits)
0000
1
0001
2
206
DATA
LENGTH
LENGTH
For setting the RS-232C data length.
(Unit: bits)
(Unit: bits)
0000
7
0001
8
208
PARITY
For setting whether the RS-232C parity bit is
to be used and, if it is used, whether even or
odd parity is to apply.
to be used and, if it is used, whether even or
odd parity is to apply.
0000
NON:
The parity bit is not used.
0001
ODD:
The parity bit is used with an odd parity.
0002
EVEN:
The parity bit is used with an even parity.
No./Item
Description of setting
209
RETURN ACK
For setting whether or not to return the ACK
code when a command is received from RS-
232C.
code when a command is received from RS-
232C.
0000
OFF:
The ACK code is not returned.
0001
ON:
The ACK code is returned.
212
MASTER
PORT
PORT
For selecting the remote control connector
for controlling the slave machine when this
VTR is to be used as the master machine for
deck-to-deck operations.
for controlling the slave machine when this
VTR is to be used as the master machine for
deck-to-deck operations.
0001
IN/OUT:
The IN/OUT connector is used.
0001
OUT:
The OUT connector is used.
<Note>
This setting takes effect only when the 9P button has
been set to LOCAL (LED off).
This setting takes effect only when the 9P button has
been set to LOCAL (LED off).