Philips CDR570/00 User Manual
English
16
This feature enables you to make fast and easy recordings of
a CD. Track increments are automatically detected from the
source material. Track increments cannot be added manually.
In analog source material a silence of 2.7 seconds or more is
automatically detected as a track increment.
a CD. Track increments are automatically detected from the
source material. Track increments cannot be added manually.
In analog source material a silence of 2.7 seconds or more is
automatically detected as a track increment.
Important:
- Recording from CD-changers should always be started in the
- Recording from CD-changers should always be started in the
RECORD DISC, RECORD TRACK or MAKE CD mode.
Preparing for autostart recording
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press SOURCE repeatedly until (depending on the
connection used):
➜ DIGITAL I d, OPTICAL I p or ANALOG a lights up
➜ DIGITAL I d, OPTICAL I p or ANALOG a lights up
and
DIGITAL 1, OPTICAL or ANALOG appears on
the display.
3 With the CD recorder stopped, press REC TYPE
once: to select ‘
RECORD DISC’;
twice: to select ‘
RECORD TRACK’;
four times: to select ‘
MAKE CD’.
➜ d and
SYNC
start to flash and the display shows the
selection.
• If
CHECK INPUT message also flashes, the digital
connection is incorrect.
Start autostart recording
1 To start recording, press PLAY on the selected source.
➜ The CD recorder automatically starts to record and d
lights continuously.
• If, however, you start the source during a track, recording
starts at the beginning of the next track or after 2.7 seconds
of silence in analog recordings.
of silence in analog recordings.
• To check the elapsed recording time, press DISPLAY. (This
can also be done during recording)
• The recorder stops automatically.
2 To stop recording manually, press STOP on the CD recorder.
➜
WAIT lights up and
SYNC
and d go out.
• If STOP 9 was pressed within 3 seconds after pressing
PLAY, no recording will take place.
• To interrupt recording, press PAUSE on the CD recorder.
➜ d starts to flash. To resume, press RECORD on the CD
recorder.
After recording the display will show
UPDATE for several
seconds.
Note: Recordings from DAT, DCC or analog sources will only
stop after 20 seconds silence.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
CD players.
DIGITAL
OPTICAL
ANALOG
ANALOG
I
I
CD
SYNC
PROGRAM
SHUFFLE REPEAT
SCAN
ALL
MANUAL
TRACK
RW
REM
TRACK
REC
TIME
REM
TOTAL
TIME
STEP
TRACK
FADE
DIGITAL
OPTICAL
ANALOG
ANALOG
I
I
CD
SYNC
PROGRAM
SHUFFLE REPEAT
SCAN
ALL
MANUAL
TRACK
RW
REM
TRACK
REC
TIME
REM
TOTAL
TIME
STEP
TRACK
FADE
CDR
MINI AUDIO
CD RECORDER
CD RECORDER
OPEN/CLOSE
EASY JOG
REWIND
RECORD
REC TYPE
MENU/STORE
CANCEL
SOURCE
PLAY/PAUSE
STOP
FFWD
ERASE
FINALIZE
SCROLL
DISPLAY
ON/OFF
Recordable
1
2
3
4
5
6
7
8
9
ANALOG
CD
RW
10 11 12 13 14
15 16
ENTER
Autostart recording
RECORDING