Invacare 9000 STANDARD WEIGHT User Manual
5 FRONT RIGGINGS
34
5 Front Riggings
5.1
Installing/Removing the Swingaway Footrest Assembly
Installing
1.
Turn the swingaway footrest assembly to the side (so that the
footplate is perpendicular to the wheelchair).
2.
Install the hinge plates on the swingaway footrest assembly onto the
hinge pins on the wheelchair frame.
3.
Push the swingaway footrest assembly towards the inside of the
wheelchair until it locks into place.
4.
Repeat this procedure for the other footrest assembly.
Removing
1.
Push the footrest release lever toward rear of chair.
2.
Rotate swingaway footrest assembly outward.
3.
Lift the swingaway footrest assembly off of the hinge pins.
FIGURE 1 Installing/Removing the Swingaway Footrest Assembly
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.
damage may occur.
The footplates will be facing each other when locked in
place.
place.
Footrest Release Lever
Hinge Plates
Hinge Pins