Invacare 9000 STANDARD WEIGHT User Manual

5   FRONT RIGGINGS

1.

Remove the swingaway footrest assembly. Refer to Installing/Removing 
the Swingaway Footrest Assembly on page 34.

2.

Remove impact guards and/or calf strap, if necessary. 

3.

Perform one of the following:
A. Wheelchairs equipped with 80° swingaway footrest (Model 

J923A-14):
•

Loosen, but do not remove the bolt and lock nut that secure 

the lower footrest assembly to the upper footrest support.

•

Reposition the lower footrest assembly to the desired 

height.

•

Securely tighten the bolt and locknut.

B.

Wheelchairs equipped with 70° swingaway footrest (Model 

Number J932A) OR 90° swingaway footrest (Model J933A):
•

Remove the bolt, locknut and four washers that secure the 

lower footrest assembly to the upper footrest support.

•

Align the mounting hole of the lower footrest assembly with 

the desired height adjustment hole in the lower footrest 

support.

•

Reinstall the bolt through the desired height adjustment hole 

in the lower footrest assembly and through the mounting 

hole in the lower footrest support. Securely tighten with the 

locknut and four washers.

4.

Repeat this procedure for the other footrest, if necessary.

5.

Replace impact guards and/or calf strap, if necessary.

6.

Reinstall the swingaway footrest assembly. Refer to Installing/Removing 

FIGURE 2   Swingaway Footrest Height Adjustment



Lay the assembly on a flat surface to simplify this 
procedure.

Upper Footrest Support

Lower Footrest 

Assembly

Bolt and 

Locknut

Upper Footrest Support

Lower Footrest 

Assembly

 Locknut

 Washers

Bolt