Invacare 9000 STANDARD WEIGHT User Manual

5   FRONT RIGGINGS

1.

Place elevating legrest assembly on the outside of the wheelchair 

and install the hinge plates onto the hinge pins on the wheelchair 

frame.

2.

Rotate elevating legrest assembly toward the inside of the 

wheelchair until it locks in place.

3.

Repeat this procedure for other legrest assembly.

4.

After seated in wheelchair, adjust the legrest to correct height. 

1.

To release the elevating legrest assembly, push the legrest release 

handle toward the inside of the wheelchair (facing the front of the 

wheelchair) and swing the legrest assembly to the outside of the 

wheelchair.

2.

Lift the elevating legrest assembly off of the hinge pins.

FIGURE 4   Installing/Removing Elevating Legrest Assembly



The footplates will be facing each other when locked in 
place.

Calfpad Assembly

Lower Footrest Assembly

Footplate

Bolt and Locknut

Hinge Pins

Hinge Plates

Legrest Release 

Handle

Elevating Legrest 

Assembly



J934A-14 shown. 
J934A installs the same way.