Spectralink BPX100 User Manual
SpectraLink Corporation
NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-H.doc
Page 46
Basic Operation
Making a call From the standby mode or after pressing the
Start Call
key, dial the
number (or dialing string). Press the
Dial
softkey or the
Start Call
key to activate the first available line and place the call.
Select a different line From the standby mode or after pressing the
Start Call
key, press
the
LINE
key plus the line number.
Answering a call When the handset rings, the line’s icon will flash and row 2 will
display the line number and your dial number. Row 4 will display
Fr
(From) and the caller ID of the incoming call.
Press the
Press the
Start
Call
key or the
Answ
softkey to answer the call. Press
Rej
to reject the call and allow the call to be redirected to voicemail.
When the call is answered an asterisk (
*
) displays at the start of row
4 which indicates that this line is in an active call with established
audio connection.
audio connection.
Place a call on hold Press the
Hold
softkey. When a call is placed on hold, an equal
character (
=
) replaces the asterisk (
*
)
and the
Rsme
softkey displays.
Mute the handset Press the
Mute
softkey. When the handset is muted, an
x
character
replaces the asterisk (
*
).
Press the
Mute
softkey again to restore
audio pickup.
Place a second call on the same
line
Only outgoing calls are permitted as the second call on a given line.
To access the second call dial tone, press
To access the second call dial tone, press
LINE
+ [the line number].
Dial the number to place the second call. When a second call is
active on the same line appearance, the second call appears below
active on the same line appearance, the second call appears below
the first on the handset display. Use
LINE
+ [the line number] to
toggle between calls. The selected call is in bold type the other call
is faded.
is faded.
Call waiting When another call comes in on a different line, the called line icon
flashes and a tone sounds in the audio stream.
To view the caller ID of the incoming call without interrupting the
To view the caller ID of the incoming call without interrupting the
active call, press
LINE
+ [the line number]. The display now shows
information about the incoming call and you will continue hearing
audio on the first call.
audio on the first call.
Answer a second call Press
Answ
or
Start Call
to answer the incoming call and place the
active call on hold. Press the
Rej
softkey to refuse the incoming call.
Pressing the
Rej
softkey will redirect the incoming call to voicemail
or as otherwise programmed.
Redial When available, the left
ReDl
softkey may be pressed to redial the
last number called.
Forward
(Local)
Calls may be forwarded on a per-line basis. To forward calls on a
given line, press
LINE
+ [the line number], press the
FWD
softkey
and enter the forwarding destination. Press the
SAVE
softkey to save
the forwarding destination. Cancel forwarding by pressing the
FWD
softkey again.
The
The
LINE
display will indicate if a line is forwarded by a
>
character
followed by the destination address.
If any line is forwarded, the standby screen will display forwarding
status. If the do-not-disturb feature is enabled, the forwarding status
If any line is forwarded, the standby screen will display forwarding
status. If the do-not-disturb feature is enabled, the forwarding status
will be pre-empted by the
Do Not Disturb
display.
If a given contact number has multiple appearances on the handset,
forward the lowest line appearance to forward all calls to that
forward the lowest line appearance to forward all calls to that