Panasonic 700 User Guide

Chapter 3. System Features

Section 700 - Operation  

Page 3-8

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

• FF1 (System): Automatic Day Mode Start Time

• FF1 (System): Automatic Night Mode Start Time

• If both auto modes are set, the starting times must differ by at least one 

hour.

• When one auto mode is turned on, the mode cannot be reset by the NIGHT 

key until 3 minutes after the auto mode is activated. (When both auto 
modes are set, the NIGHT key cannot be used.)

• If a NIGHT key is not assigned, the access code #52 can be used instead.

(CPC-B Version 7.0 or higher and CPC-A II Version 7.0 and higher)

Auto Day Mode allows the DBS to go into day mode automatically.

The DBS can also be programmed to go into night mode automatically (see 
“Night Service,” page 3-37).

If only one of the auto modes is turned on, the DAY/NIGHT1/NIGHT2 
toggle key or the DAY, NIGHT1, or NIGHT2 is used to turn off the auto 
mode. For instance, if NIGHT1 mode has been activated automatically, the 
attendant must press the DAY/NIGHT1/NIGHT2 toggle key or the DAY key 
to go into day mode. (Note: You must wait at least 3 minutes after the 
automatic mode is activated before manually changing the mode. Otherwise 
the system will immediately revert back to the automatic mode.)

If only one of the auto modes is turned on, the DAY/NIGHT1/NIGHT2 
toggle key or the DAY, NIGHT1, or NIGHT2 key can also be used to go into 
an auto mode before the scheduled time. If auto day and both auto night 
modes are turned on, the manual mode keys can be used. 

• FF1 (System): Auto Day Mode Start Timer

• FF1 (System): Auto Night1 Mode Start Timer