Ricoh 106 User Manual
35
COPYING
4. COPYING
Setting an Original on the ADF (Type 2 only)
You can load up to 10 sheets of plain paper (80 g/m
2
or 20 lb) at a time into
the Automatic Document Feeder (ADF).
Important!
Check to make sure that the ADF cover is
securely closed before using it.
securely closed before using it.
1
Fan the stack of originals. Never try to
place more than 10 sheets of plain pa-
per onto the ADF.
place more than 10 sheets of plain pa-
per onto the ADF.
2
Straighten up all four sides of the stack,
by tapping them on a desk or table top.
by tapping them on a desk or table top.
3
Place the stack of originals face down
on the ADF and slide the document
guide against the side of the stack.
on the ADF and slide the document
guide against the side of the stack.
Note
The side of the original to be copied should
be face down.
be face down.
4
Insert the stack of originals along the
document guide into the ADF.
document guide into the ADF.
Note
Insert your stack of originals into the ADF
until it stops. If you do not push it right in,
the machine will not detect the stack.
until it stops. If you do not push it right in,
the machine will not detect the stack.