Pelco C1300M-C (11/08) User Manual

32

C1300M-C (11/08)

A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The IPSXM 
positioning system is capable of eight zones, each with a 20-character label. 

To program a zone:

1.

Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open the cursor moves 
to the right. 

2.

Move the joystick up or down to view selections. Press Iris Open to enter selection.

3.

Use the joystick to position the cursor beside EDIT ZONE.

4.

Press Iris Open. The Zone programming window appears on the monitor.

5.

Follow the directions displayed on the monitor. After the left and right limit stops are set, the 
Zones menu reappears with the ZONE ENABLED option set to YES.

To edit a zone label:

1.

Use the joystick to position the cursor beside EDIT ZONE LABEL.

2.

Press Iris Open. The following appears on the monitor:

3.

Use the joystick to position the cursor beside a character. Press Iris Open to enter selection. 
To clear a character, position the cursor beside BACKSPACE, and then press Iris Open.

4.

When the label is completed, move the cursor to OK. Press Iris Open to return to the Zones 
menu.

To disable a zone (a zone is enabled automatically when it is programmed) or to blank a zone:

1.

Move the cursor beside ZONE ENABLED or ZONE BLANKING.

2.

Press Iris Open. The cursor moves to the right.

3.

Move the joystick up or down to view selections. Press Iris Open to enter selection.

To clear a zone:

1.

Use the joystick to position the cursor beside CLEAR ZONE.

2.

Press Iris Open. Follow the instructions on the screen.

EXIT

LANGUAGE  

ENGLISH

UNIT INVERSION  

OFF

<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>

RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM

PELCO EXSITE IPSXM

<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>

BACK
EXIT

UNIT SETTINGS

ZONE NUMBER  

1

 

***ZONE NOT DEFINED***

<EDIT ZONE LABEL>

<EDIT ZONE>
ZONE ENABLED  

NO

ZONE BLANKING  

OFF

<CLEAR ZONE>

BACK
EXIT

ZONES

LABEL FOR PRESET
PRESET NUMBER ------
1234567890 OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZ.,-/ SPACE
abcdefghij BACKSPACE
klmnopqrst
uvwxyz*;: