Pelco C1300M-C (11/08) User Manual
C1300M-C (11/08)
31
Quick Programming Guide
(See Page 9)
PATTERNS
A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be
recalled with a command from a controller or automatically by a programmed function (alarm, park
or power-up).
recalled with a command from a controller or automatically by a programmed function (alarm, park
or power-up).
The ExSite IPSXM can handle up to four user-defined patterns. Pattern length is based upon memory
usage rather than a fixed amount of time. The complexity of a pattern will determine the amount of
storage available to program other patterns.
usage rather than a fixed amount of time. The complexity of a pattern will determine the amount of
storage available to program other patterns.
To program a pattern:
1.
Use the joystick to position the cursor beside PATTERN NUMBER. Press Iris Open. The cursor
moves to the right.
moves to the right.
2.
Move the joystick up or down to view selections. Press Iris Open to enter selection.
3.
Use the joystick to position the cursor beside PROGRAM PATTERN.
4.
Press Iris Open. The Patterns programming window appears on the monitor.
5.
Follow the directions displayed on the monitor.
After a pattern is programmed, the remaining storage percentage is displayed on the screen. This is
the amount of memory available to program the remaining patterns.
the amount of memory available to program the remaining patterns.
To clear a pattern:
1.
Use the joystick to position the cursor beside CLEAR PATTERN.
2.
Press Iris Open.
3.
Follow the directions displayed on the monitor.
NOTES:
•
When programming one or more presets within a pattern use the normal controller commands
to Call a Preset.
to Call a Preset.
•
Not all controllers can start all four patterns. However, any of the four patterns can be
automatically started with park, power-up, and alarm functions.
automatically started with park, power-up, and alarm functions.
EXIT
LANGUAGE
ENGLISH
UNIT INVERSION
OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
EXIT
UNIT SETTINGS
PATTERN NUMBER
1
<PROGRAM PATTERN>
<CLEAR PATTERN>
<CLEAR PATTERN>
BACK
EXIT
EXIT
REFERENCE INFORMATION
PATTERN USAGE
PATTERN USAGE
0%
REMAINING
100%
PATTERNS