SPX Cooling Technologies 17700-2K User Manual

 © 2001 Robinair, SPX Corporation

NOTE: If using a refillable tank, install the tank upside down, and connect the fill
hose to the vapor valve.

4. Press the

key, and the tank automatically refills. The unit stops when

a sufficient amount of refrigerant has been transferred to the internal tank, or
if the source tank is empty. Press the

 key to pause the process. Press

 again to exit, or 

 to resume.

5. When the fill process is complete, press 

 to exit.

This function displays how long the vacuum pump has run since the last oil
change.

1. Press the 

 key. Use the arrow keys to select VACUUM OIL TIME, and

press 

 to begin.

2. The display reads: OIL TIME = XX:XX This shows how long the pump has

run since the last oil change. The time resets to zero after a VACUUM PUMP
OIL CHANGE. See page 20 of this manual for details.

3. Press STOP to exit.

This function is used to show the operator how many pounds or kilograms of
refrigerant have been recovered since the last filter change.

1. Press the 

 key. Use the arrow keys to select FILTER CAPACITY, and

press 

 to begin.

2. The display reads: FILTERED= XXXlbs(kg). This shows how much

refrigerant has passed through the filter. The amount filtered resets to zero
after a FILTER CHANGE. See page 19 of this manual for details.

3. Press 

 to exit.

Use the BASIC PROMPT option to receive step-by-step, on-screen prompting
through any procedure. Use ADVANCED PROMPT once you know the procedure
and no longer need the step-by-step routine.

1. Press the 

 key. Use the arrow keys to choose SELECT PROMPT, and

press 

 to begin.

2. Toggle between BASIC/ADVANCED using the 

 keys.

3. Press 

to save the current choice and exit.

NOTE: This manual is written for the BASIC PROMPT option.