SPX Cooling Technologies 17700-2K User Manual

34700-2K/17700-2K Cool-Tech Recovery/Recycling/Recharging Unit

1. Press the 

 button. The top line of the display reads SETUP MENU.

2. Use the 

 and

 arrow keys to scroll through the menu choices

displayed on the second line. The menu choices are:

1. SELECT LANGUAGE

7. VACUUM OIL TIME

2. SELECT UNITS (ENGLISH/METRIC)

8. CHANGE VACUUM PUMP OIL

3. TANK REFILL

9. SELECT PROMPTS

4. RECYCLE ONLY

10. CHANGE DEFAULTS 

 (password protected)

5. FILTER CAPACITY

11. VERSION X.XX

6. CHANGE FILTER

3. Press 

 to make a choice from the menu. Press 

 to pause any

process, and 

 a second time to exit any process.

The filter-drier removes acid, particulates, and water from the refrigerant. Change
the filter-drier after 150 pounds (68 kg) of refrigerant has been filtered. See the
REPLACING THE FILTER DRIER section on the following page, as well as the
Maintenance Section, for instructions.

Manual recycling may be necessary if excessive air and/or moisture is recovered
from the A/C system.

1. Press the 

 key. Use the arrow keys to select RECYCLE ONLY, and

press 

 to begin.

2. Press the 

 button to start recycling. To pause recycling, press the

 key. To terminate recycling, press the 

 key again, or press

 to resume.

1. Press the 

 key. Use the arrow keys to select TANK REFILL, and press

 to begin.

2.  Connect the fill hose to the source tank.

3. Open the tank valve. Invert the tank, install it on the back of the unit, and

secure the tank strap.