Panasonic DVD-LS865 User Manual

Page of 20
16
RQT
9
201
Reference
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do 
not solve the problem, refer to “Customer Services Directory” on page 19. (Reference pages are shown in parentheses.)
The following do not indicate malfunction.
≥ Sound from the AC adaptor during recharging.
≥ The battery pack warming up when recharging or during use.
≥ The surface and area around the unit becoming warm when used for long periods.
No power.
≥ Check connections to the AC adaptor or battery pack. (4)
≥ The unit has protection circuitry that is activated if it becomes too hot or too cold. The unit will not work if this 
occurs. Use the unit between 5 
oC (41 
o
F) and 35 
oC (95 
o
F).
Unit turns off 
automatically.
≥ The unit turns off after it has been stopped for about 15 minutes (about 5 minutes when the unit is powered by the 
battery pack) to conserve power. Turn the unit on again.
Cannot charge or the 
[CHG] indicator fails to 
light.
≥ The charging time increases when the temperature is too hot or too cold, and charging may not be possible under 
some circumstances.
≥ Check connections to the AC adaptor or battery pack. (4)
Play time dramatically 
reduced after recharging.
≥ The battery pack has reached the end of its service life (It can be recharged about 300 times).
No response when any 
buttons pressed.
≥ This unit cannot play discs other than the ones listed in these operating instructions. (5)
≥ The unit may not be operating properly due to lightning, static electricity or some other external factor. Turn the unit 
off and then back to ON. Alternatively, turn the unit off, disconnect the power source (AC or battery pack), and then 
reconnect it.
≥ Condensation has formed: Wait 1 to 2 hours for it to evaporate.
≥ Please insert the disc correctly. (6)
You have forgotten your 
ratings password.
≥ While stopped, press and hold [:] and [;] on the unit and then also press and hold [ON] on the unit until 
“Initialized” disappears from the screen. Turn the unit off and on again. All settings will return to the default values.
No picture or sound.
≥ Check that the disc has something recorded on it.
It takes time before play 
starts. 
≥ Play may take time to begin when an MP3 track has still picture data. Even after the track starts, the correct play 
time will not be displayed; however, this is normal.
≥ This is normal on DivX video.
Menu doesn’t appear. 
[VCD] (with playback 
control)
≥ Press [∫ –OFF] twice and then press [ON].
Subtitle position is wrong.
≥ Adjust the position. (“Subtitle Position” in Display Menu) (12)
No subtitles
≥ Display the subtitles. (10)
The subtitles overlap 
closed captions recorded 
on discs.
≥ Clear the subtitles. (10)
In A-B repeat, point B is 
automatically set.
≥ If you have set only the starting point (point A), the end of an item becomes point B when it is reached.
Play doesn’t start. 
≥ This unit may not play WMA and MPEG4 that contains still picture data.
≥ If playing DivX VOD content, refer to the homepage where you purchased the DivX VOD content. (Example: 
www.divx.com/vod)
≥ If a disc contains CD-DA and other formats, proper playback may not be possible. 
Picture distorted.
≥ There may be some video distortion during search, but this is normal.
≥  Picture quality may worsen or some frames may be skipped when viewing MPEG4, but this is normal.
≥ [DivX] Change “Source Select” in Picture Menu. (11)
Picture stops.
≥ Picture may stop if the DivX files are greater than 2 GB.
No picture on the LCD. 
≥ Check connections. (4)
≥ Select a LCD-SIZE other than “MONITOR OFF” (No picture). (7, Selecting how to show 4:3 aspect pictures on 
the LCD)
The LCD is dark.
≥ Select “DAYLIGHT” or adjust the brightness. (7)
LCD pixels turn black or 
radiate different colors.
≥ The LCD is constructed with precision technology so 99.99 % of the pixels are active, but of the remaining of 
0.01 %, there are pixels that may be black or emit light constantly. This phenomenon is not a malfunction.
Picture doesn’t appear on 
the television (or the size 
of the picture seems 
wrong).
≥ Check connections. (15)
≥ Check that the television is on.
≥ Check that the input mode on the television is correct.
≥ Check the settings of “TV Aspect” in “Video” tab. (13)
≥ Turn off the zooming feature on your television if you are using Zoom. (12)
≥ Ensure that the unit is connected directly to the television, and is not connected through a video cassette recorder. (15)
≥ Use the television to change the aspect. 
≥ Adjust “Just Fit Zoom” in Display Menu. (12)
Menu not displayed 
correctly.
≥ Restore the zoom ratio to a1.00. (12)
≥ Set “Subtitle Position” in Display Menu to “0”. (12)
Auto zoom function does 
not work well.
≥ Turn off the zooming feature on your television.
≥ Use the other preset aspect ratios or manual adjustment. (12)
≥ Zoom function may not work well, especially in dark scenes and may not work depending on the type of disc.
Power
No operation
Specific operation impossible or incorrect
Picture incorrect
RQT9201-P.book  16 ページ  2008年2月6日 水曜日 午後4時38分