Hitachi VT-FX602S User Manual
RECORDING
- 47 -
in the forward direction.
• Tape must be fully rewound.
• Tape must be fully rewound.
1 Select "BLANK SEARCH" mode
Press BLANK SEARCH button.
The VCR begins fast forwarding to the beginning of the blank part of the
tape.
Press BLANK SEARCH button.
The VCR begins fast forwarding to the beginning of the blank part of the
tape.
BLANK SEARCH
2 After Blank Search
The VCR will automatically stop.
The VCR will automatically stop.
RECORDING
Make sure...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel
as located on the back of the VCR. (CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on
the display.
• Insert a cassette with its erase prevention tab in place. (If necessary,
rewind or fast forward the tape to the point at which you want to begin
recording.)
• You must select the recording mode in TV STEREO or SAP when you
record a broadcast.
Refer to "TO SELECT STEREO OR SAP MODE" on page 13.
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel
as located on the back of the VCR. (CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on
the display.
• Insert a cassette with its erase prevention tab in place. (If necessary,
rewind or fast forward the tape to the point at which you want to begin
recording.)
• You must select the recording mode in TV STEREO or SAP when you
record a broadcast.
Refer to "TO SELECT STEREO OR SAP MODE" on page 13.
VIEWING AND RECORDING THE SAME PROGRAM
1 Select the channel to be recorded
Press number buttons on the remote control or the CHANNEL (or
CH/SET)
Press number buttons on the remote control or the CHANNEL (or
CH/SET)
or
button.
CH 32