Hitachi VT-FX602S User Manual

RECORDING 

- 49 - 

    PAUSE 
    

 

 
 
 
 
 
 
 
 

Press PAUSE or REC button to resume recording. 

NOTE: To prevent tape damage, after five minutes, the VCR will automatically 
switch to the Stop mode. You may review the time remaining with " " marks on 
the TV screen. Each " " mark shows one minute. 

 

To edit an unwanted segment from the already recorded portion of tape 
while VCR remains in record mode. 
1) Press PAUSE button. 
2) Press and hold REW button until you have reached the beginning of the 
unwanted segment. (If you rewind past the beginning of the unwanted 
segment, press and hold F.FWD button until you have reached it.) 

NOTE: If you do not press PAUSE button again within five minutes, VCR will 
automatically switch to the Stop mode. 

3) Press PAUSE or REC button to resume recording. 

 

You can record one program while viewing another. To start recording, 
follow steps [1] to [3] under "VIEWING AND RECORDING THE SAME 
PROGRAM". 

NOTE: When you record with a cable converter box, you cannot record one 
program while viewing another. 

4 Select the TV mode 
Press VCR/TV button on the remote control to select TV so that the "VCR" 
disappears from the display.