Perle Systems 5500174-11 User Manual

 

Page 29

Chapter 2 Installing drivers and host cards

This section describes the mechanical installation of SPEED LE cards.

To install an SPEED LE host card proceed as follows;

1. Turn off the power to your system and unplug the power cord.

2. Remove the system cover to expose the inside of the connector panel for host cards.

3. Insert the SPEED LE card you want to install into a vacant host PCI card slot and secure 

in place as shown in the next picture.

4. Repeat step 

 until you have installed all the SPEED LE cards you want.

5. Replace and secure the system cover.

Installation of SPEED LE cards is now complete.

Note

The exact location of host card slots varies for different systems, for exact mechanical 
details of your system, refer to your system documentation.