Perle Systems 5500174-11 User Manual

Page of 59
 
Page 31
Chapter 2 Installing drivers and host cards
Removing host cards
To remove any SPEED LE card from your system, proceed as follows;
1. Turn off the power to your system and unplug the power cord.
2. Remove the system cover to expose the inside of the connector panel for host cards.
3. Disconnect any cables or connector boxes connected to the card you want to remove.
4. Undo the securing screw for the host card you want to remove then lift the card out of its 
slot as shown in the next picture.
5. Repeat from step 
 until you have removed all the host cards you want.
6. Replace and secure the system cover.
7. Plug in the mains lead and turn on the power.
Removal of SPEED LE card  is now complete.
Note
The exact location of host card slots varies for different systems, for exact mechanical 
details of your system, refer to your system documentation.
Warning
Dangerous voltages exist inside computer systems. Before 
removing host cards from your system, turn off the power supply 
and unplug the power cord.
Caution
Full anti-static precautions should be taken when handling host 
cards.