Sony DSX-A50BT User Manual
18
Operating the Bluetooth
functions
functions
1
Press
.
The call menu appears.
2
Rotate the control dial until the desired
item appears, then press it.
item appears, then press it.
3
Press
(BACK)*.
The source returns to the Bluetooth
phone.
phone.
* For PAIRING, REDIAL, VO DIAL and BT
SIGNL settings, step 3 is not necessary.
The following items can be set:
* Depending on the cellular phone, this unit’s
ringtone may be output even if set to “2 (cellular
phone).”
phone).”
Pairing
The Bluetooth device (cellular phone, audio
device, etc.) and this unit need to be
“paired” before use between each other via
the Bluetooth function.
device, etc.) and this unit need to be
“paired” before use between each other via
the Bluetooth function.
Tips
• For details on pairing for a Bluetooth device,
refer to the operating instructions supplied with
the device.
the device.
• You can pair up to 9 Bluetooth devices with this
unit.
1
Place the Bluetooth device within 1 m
(3 ft) of this unit.
(3 ft) of this unit.
2
Press
and rotate the control
dial until “PAIRING” appears, then
press it.
The unit enters pairing standby mode.
press it.
The unit enters pairing standby mode.
3
Set the Bluetooth device to search for
this unit.
A list of detected devices appears in the
display of the device to be connected.
this unit.
A list of detected devices appears in the
display of the device to be connected.
PAIRING
PH BOOK
REDIAL
RECENT
VO DIAL
DIAL NUM
RINGTONE
*
Selects whether this unit or the
connected cellular phone outputs the
ringtone: “1 (this unit)”- “2 (cellular
phone).”
connected cellular phone outputs the
ringtone: “1 (this unit)”- “2 (cellular
phone).”
AUTO ANS
Sets this unit to answer an incoming call
automatically: “OFF”-“1 (about 3
seconds)”-“2 (about 10 seconds).”
automatically: “OFF”-“1 (about 3
seconds)”-“2 (about 10 seconds).”
BT SIGNL
(Set Bluetooth Signal) (page 20,
Flashing