Sony DSX-A50BT User Manual

33

*1 The actual range will vary depending on 

factors such as obstacles between devices, 
magnetic fields around a microwave oven, 
static electricity, reception sensitivity, antenna 
(aerial)’s performance, operating system, 
software application, etc.

*2 Bluetooth standard profiles indicate the 

purpose of Bluetooth communication 
between devices.

 Speaker outputs

 4 – 8 ohms

 50 W 

× 4 (at 4 ohms)

 

Audio outputs terminal (front/rear)
Power antenna (aerial) relay control terminal
Power amplifier control terminal

 

Remote controller input terminal
Antenna (aerial) input terminal
AUX input jack (stereo mini jack)
USB signal input connector

 12 V DC car battery 

(negative ground (earth))

 Approx. 178 

× 50 × 120 mm 

(7

1

/

8

 

× 2 × 4

7

/

8

 in) (w/h/d)

 Approx. 182 

× 53 × 103 mm 

(7

1

/

4

 

× 2

1

/

8

 

× 4

1

/

8

 in) (w/h/d)

 Approx. 0.7 kg (1 lb 9 oz)

 

Remote commander: RM-X231
Parts for installation and connections (1 set)

Your dealer may not handle some of the above 
listed accessories. Please ask the dealer for 
detailed information.

Design and specifications are subject to change 
without notice.

The following checklist will help you remedy 
problems you may encounter with your unit.
Before going through the checklist below, 
check the connection and operating 
procedures.

For details on using the fuse and removing the 
unit from the dashboard, refer to the 
installation/connections manual supplied with 
this unit.

If the problem is not solved, visit the support 
site on the back cover.

No power is being supplied to the unit.
 Check the connection or fuse.
 If the unit is turned off and the display 

disappears, it cannot be operated with the 
remote commander. 
– Turn  on  the  unit.

The power antenna (aerial) does not extend.
 The power antenna (aerial) does not have a 

relay box.

No sound.
 The ATT function is activated.
 The position of the fader control “FADER” is 

not set for a 2-speaker system.

No beep sound.
 The beep sound is canceled (page 28).
 An optional power amplifier is connected and 

you are not using the built-in amplifier.

The contents of the memory have been 
erased.
 The power supply lead or battery has been 

disconnected or it is not connected properly.