JVC DR-MV5S User Manual
Masterpage:Right0
EN
31
Filename [MV5S_08Basic TimerDub.fm]
Page 31Tuesday, 8 March 2005 19:32
TIMER RECORDING
You can program each deck to timer-record as many as
8 programs up to 30 days ahead.
With the VCR Plus+ system, timer programing is greatly simplified
because each TV program has a corresponding code number
which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
8 programs up to 30 days ahead.
With the VCR Plus+ system, timer programing is greatly simplified
because each TV program has a corresponding code number
which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
NOTES:
● There may be cases that the VCR Plus+ Timer Programing function
prolongs the stop time of the programing.
● When two successive programs are recorded on a DVD-RW disc with
the VCR Plus+ Timer Programing function, the beginning of the
second one may be left off the recording.
second one may be left off the recording.
● VCR Plus+ Timer Programing is not possible on the discs used
exclusively for On-Disc Timer Programing.
● If the copy limited program is received during timer-recording, the unit
enters Record Pause mode. Recording starts again if it is switched to
a recordable broadcast during the time you programed.
a recordable broadcast during the time you programed.
● To record the programs received by cable box or DBS receiver,
record on the DVD discs. For details, refer to “Cable Box and DBS
Receiver Users (DVD Deck Only)” above.
Receiver Users (DVD Deck Only)” above.
1
Press DVD or VHS to select the deck on which you want to
perform timer programing.
2
For DVD deck
Load a recordable disc.
For VHS deck
Load a cassette with safety tab intact.
For VHS deck
Load a cassette with safety tab intact.
3
Press VCR Plus+ to access the VCR Plus+ screen.
4
Press the number buttons to
enter the PlusCode number of a
program you wish to record, then
press ENTER.
program you wish to record, then
press ENTER.
● If you have made a mistake, press
CANCEL and input the correct
number before you press ENTER.
number before you press ENTER.
● To clear all entered numbers at a
time, press CLEAR (8).
● If the number you entered is
invalid, “PLUSCODE NO. ERROR CONFIRM PLUSCODE NO.
THEN RETRY” appears on the TV screen. Input a valid PlusCode
number.
THEN RETRY” appears on the TV screen. Input a valid PlusCode
number.
● If “GUIDE PROGRAM IS NOT SET” appears on the TV screen, set
Guide Channel numbers manually. (
● When “PROGRAM FULL DELETE UNWANTED TIMER PROGRAM”
appears on the TV screen, you need to cancel some of the reserved
programs. (
programs. (
5
The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
program data.
program data.
● To cancel this setting, press RETURN.
6
Press w e to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
● “STOP” (To advance/go back the stop time by 30 minutes, press and
hold rt).
● “DAILY/WEEKLY” (
墌
● “REC MODE” (
● “NAME” (
pg. 64, “Modify Title Name”) (DVD deck only)
7
Press ENTER to access the Program Confirmation screen.
8
Press ENTER to complete timer programing.
● If “PROGRAM OVERLAPPED” appears on the TV screen, see
page 35.
9
Press TIMER # to engage the unit’s timer mode. The DVD timer
lamp lights up on the unit and the unit is automatically turned off.
● To disengage the timer mode, press TIMER # again.
Weekly/Daily Recording
You can record programs with one of the following weekly/daily
timer settings.
timer settings.
WEEKLY
: Select to record a weekly program.
MON–FRI
: Select to record a daily program from Monday through
Friday.
MON–SAT
: Select to record a daily program from Monday through
Saturday.
SUN–SAT
: Select to record a daily program from Sunday through
Saturday.
VCR Plus+
®
Timer Programing
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, the wrong channel number will
be displayed on the VCR Plus+ program screen in step 5. When this
happens, set the correct Guide Channel number for that station.
(
channel number has been changed, the wrong channel number will
be displayed on the VCR Plus+ program screen in step 5. When this
happens, set the correct Guide Channel number for that station.
(
墌
pg. 77, “Changing VCR Plus+
®
Setting”)
Cable Box and DBS Receiver Users (DVD Deck Only)
To timer-record a satellite broadcast using the VCR Plus+
system:
A Perform “VCR Plus+
To timer-record a satellite broadcast using the VCR Plus+
system:
A Perform “VCR Plus+
®
Timer Programing”.
B Set the cable box or DBS receiver to the appropriate channel
before the selected program begins.
C Leave the cable box or DBS receiver’s power on.
before the selected program begins.
C Leave the cable box or DBS receiver’s power on.
rtwe
ENTER
CLEAR (
8)
DVD
0 – 9
VHS
CANCEL
VCR Plus+
TIMER
RETURN
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “Changing VCR Plus+
displayed; if not, see “Changing VCR Plus+
pg. 77) and
set the Guide Program number correctly.
1
2
3
4
5
6
7
8
9
0
SP
1 2 3 4
VCR Plus+ PRGM
DATE
START
STOP
CH
DAILY/WEEKLY
REC MODE
NAME
PLUSCODE NO.
ENTER VCR PLUS+ CODE WITH [0 - 9] KEYS
THEN PRESS [ENTER]
THEN PRESS [ENTER]
OK
MV5S_00.book Page 31 Tuesday, March 8, 2005 7:38 PM